03-19-2022 10:01 AM
Hello. I am trying to do some SRTE simulations and I am using both IOS XR and IOS XE.
With IOS XR, I was able to set the color of routes coming from a CPE by using inbound route-policy.
However whenever I try this with IOS XE, nothing happens. What I need to do is to apply the route-map outbound to remote peer (i.e. route reflector). Whenever I apply the color set outbound to remote VPNv4 peer, the remote PE receives the route with the appropriate color. Coloring the prefix inbound from the CPE has no effect.
route-map COLOR_RED, permit, sequence 10
Match clauses:
Set clauses:
extended community Color:20
Policy routing matches: 0 packets, 0 bytes
Is this really a limitation of IOSXE and only allowed in IOSXR or I'm missing something? Thanks in advance.
Solved! Go to Solution.
03-19-2022 02:16 PM - edited 03-19-2022 02:19 PM
Hi @jpl861 ,
Setting the color extended community inbound on the PE is indeed not supported in IOS-XE. The recommended approach is to set it outbound on the VPNv4 session, as you mentioned.
Regards,
03-19-2022 11:42 AM
is this real or lab ?
03-19-2022 02:16 PM - edited 03-19-2022 02:19 PM
Hi @jpl861 ,
Setting the color extended community inbound on the PE is indeed not supported in IOS-XE. The recommended approach is to set it outbound on the VPNv4 session, as you mentioned.
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: