Hello,
On XE, SR-TE 'total accumulated path metric' can be known by the following command.
CSR#show segment-routing traffic-eng policy name pol1
Name: pol1 (Color: 100 End-point: 4.4.4.4)
Candidate-paths:
Preference 100 (CLI):
Dynamic (active)
Metric Type: TE, Path Accumulated Metric: 242
16005 [Prefix-SID, 5.5.5.5]
16004 [Prefix-SID, 4.4.4.4]
But what is the equivalent command on XRV to know the 'total path metric' ?
Thanks,
Sachin
