I have the following configuration:
ip vrf CustA
rd 100:1
import ipv4 unicast map global2vrf
route-target export 1:1
route-target import 1:1
route-target import 2:2
router bgp 65008
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor 140.142.41.9 remote-as 4500
neighbor 192.168.1.5 remote-as 65005
neighbor 192.168.1.5 ebgp-multihop 255
!
address-family ipv4
network 0.0.0.0
network 140.142.41.0 mask 255.255.255.0
neighbor 140.142.41.9 activate
exit-address-family
!
address-family vpnv4
neighbor 192.168.1.5 activate
neighbor 192.168.1.5 send-community both
exit-address-family
!
address-family ipv4 vrf CustA
network 128.208.90.0 mask 255.255.255.252
redistribute connected
exit-address-family
ip prefix-list global-acl seq 5 permit 0.0.0.0/0
ip prefix-list global-acl seq 10 permit 140.142.41.0/24
!
route-map global2vrf permit 10
match ip address prefix-list global-acl
ip route 0.0.0.0 0.0.0.0 140.142.41.9
---------------------------------------------------------------------------------
mixing#show ip bgp vpnv4 vrf CustA
BGP table version is 27, local router ID is 6.6.6.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 100:1 (default for vrf CustA)
Import Map: global2vrf, Address-Family: IPv4 Unicast, Pfx Count/Limit: 2/1000
Export Map: vrf2global, Address-Family: IPv4 Unicast, Pfx Count/Limit: 0/1000
*> 0.0.0.0 140.142.41.9 0 32768 i
*> 1.1.1.0/24 192.168.1.5 409600 0 65005 ?
*> 10.1.1.0/24 192.168.1.5 0 0 65005 ?
*> 10.2.1.0/24 192.168.1.5 0 0 65005 ?
*> 10.10.10.0/24 192.168.1.5 409600 0 65005 ?
*> 30.30.30.0/24 192.168.1.5 409600 0 65005 ?
*> 128.208.90.0/30 0.0.0.0 0 32768 i
*> 128.208.90.4/30 0.0.0.0 0 32768 i
*> 140.142.41.0/24 0.0.0.0 0 32768 i
mixing#show ip bgp vpnv4 all neighbors 192.168.1.5 advertised-routes
BGP table version is 27, local router ID is 6.6.6.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 100:1 (default for vrf CustA)
Import Map: global2vrf, Address-Family: IPv4 Unicast, Pfx Count/Limit: 2/1000
Export Map: vrf2global, Address-Family: IPv4 Unicast, Pfx Count/Limit: 0/1000
*> 128.208.90.0/30 0.0.0.0 0 32768 i
Route Distinguisher: 200:2 (default for vrf CustB)
*> 128.208.90.4/30 0.0.0.0 0 32768 i
Total number of prefixes 2
Why is 0.0.0.0/0 NOT advertised to its peer ?
