Network Access Control

Hello Experts,My customer is looking into deploying 802.1x, EAP-PEAP with EAP-GTC and an inner protocol. They want to use hardware token card as an additional security in case the laptop got stolen. Does anyone see an issue or anything we need to kno...

Cisco Application Deployment Engine OS Release: 2.2ADE-OS Build Version: 2.2.2.015ADE-OS System Architecture: x86_64Copyright (c) 2005-2015 by Cisco Systems, Inc.All rights reserved.Hostname: ACS01-AAAVersion information of installed applications---...

Hello,We were seeing high frequency of "High Average Load" alarm on M&T and had to enable log suppression to avoid this alarm.However after log suppression the customer states that they do not have complete visibility over the logs.For example a rogu...

I have a customer that performed the ISE 2.0 to 2.0.1 upgrade process and the final server upgrade failed and was stuck in a hung state; unable to access the server or complete upon a reboot.Initial state:SITE 01ISE SERVER 01 - PAN (Primary) - 2.0ISE...

Hello,Our customer wants to use a Whitelist Identity Group to provide exception to endpoints from ISE.Is there a way where we can define the expiry (in terms of months,weeks,days) of these endpoints from the whitelist group ?

I am curious to get your feedback on the best order to authorize devices in the Authorization Policy. Currently we have it set for First Matched Rule Applies, and have the rules set up like this: 1: Wireless Blacklist devices --> Denied 2: MAB devic...

Hi Folks, looking for some feedback on an issue I've been dealing with as of late. Issue:Device X connects to SSID: xxyy. MAB authentication, Redirect to CWA, CWA responds with [500] Internal Error. Please contact system Administrator. If you are the...

Hi,What level of TLS does ISE 1.3 support? Can it support TLS 1.1 and 1.2 ?Thanks!TK.

Hello I have a problem with save in Cisco ACS. I don`t save any with button "Save changes". It is hide. Please help me. Thanks 

Folks,I have a customer POC I am doing and they have admins across two separate AD forests.  I cannot reference an AD Join Point when referencing an External Identity source for admin users - I can only select either one or the other AD Forests.On th...