Network Access Control

Hi Generate the CA certificate from Microsoft Server Window 2008 R2, create  a new web server certificate template, add the client authentication on  the extension tab for EKU. Other option remain default setting. I trying to import this certificate ...

I'm using Secure ACS 5.3 and a WLC (WLC is running software version 7.3.101.0) to authenticate wireless clients (authenticating via PEAP).The client machines are running Windows7 and AnyConnect 3.1 NAM.The authentication is configured for machine and...

I am trying to configure acs5.2 and tacacs+ to authenticate via active directory to infoblox netmri, has anyone done this? I am looking for basic setup, shell commands etc.. I test from netmri using tacacs+ servers and I pass test, but when trying to...

exampleauthentication policyif guest - and - device location starts with : building_1 then GuestAccesseverithing goes finebut if MicrosoftWorkstation - and - device location starts with : building_1 and IdentityGroup:Name MATCH Guest then GuestAccesd...

Hi,I  am trying to authenticate dot1x enabled wired endpoints through ISE.  Initially after successful authentication , Authorization is set for to  apply dAcl on Switch port. got expected result for same . But when I try to apply  Change of Vlan Aut...

Does anyone have the loading information for Cisco ACS 5.4 running on a VM.  After user and device authentication figures.  Thanks

Hi,I`m working on Dynamic Vlan Assigmenton the basis of end user authenticatedwhoc are part of specific AD Group in c ampus enviorment.Objective: Need to assign the vlan on switch port on the basis of authenticated users OU Group in Active Directory....

Hi everybody.I have a setup, containing 2x ACS 5.3 Servers and a 2960 Switch running Version 12.2(55)EX2.When the ACS Servers are going down, we are authorizing client to the critical VLAN. This works just fine.When the ACS Servers are coming up agai...

Hi, yesterday the local certificate on my primary ACS server expired and users immediately had issues getting on the network. As soon as I worked out what had happened I shutdown the ACS by the command 'acs stop'. The local certificate on the seconda...

HII am Puneet Gupta.We have Nexus7009 at client network but due to limitaion of Nexus switches that they can not be directly integrate Nexus with RSA so client has purchased cisco ACS for the AAA.We are able to do the authenication and autorization v...

Ciao,I not found a field for insert a description's  Mac Address. Is there a possibility in ISE to do this ?Iarno Pagliani

Hello,After power outage, when my ACS reboots the web interface doesn't start.When I connect to CLI with SSH, I enter the command :sh acs-config-web-interfaceThis is the result :ACS management must be runningPlease issue 'acs start' CLI if stopped, o...

message on ACS server:LI-LP-ACS01/DC-admin# application upgrade ACS_5.4.0.46.tar.gz FTPDo you want to save the current configuration ? (yes/no) [yes] ? Generating configuration...Saved the running configuration to startup successfully% Manifest file ...