Network Access Control

Hi,I have issue with AD group mapping with local ACS (5.1). The issue is that it is able to authenticate any users in the AD eventhough I have a map with local ACS group to a particular group of the AD. here is my config:1. Add two group of AD to Dir...

Hi all,I’m trying to replace an existing VMPS installation with MAB on ACS 5.2. To keep it simple I just want Use Internal Identity Stores à HostI have a lab environment that is working, but not in the way I want…. The risk of typo it to large....I h...

We have two secure ACS devices Ver 5.1.0.44.2 one of themis reporter and somehow we are start getting "active sessions are over limit" messgage,and when click on details :session is over 250000.Let me know if I can provide any more details.Any help a...

Dear All,I am getting weird issue. My ACS 5.0 is in subnet 10.1.1.0/24. All the AAA clients which are in the same subnet can communicate with the ACS but different subnet cannot.I have checked the firewall between them, Its allow any any with all ser...

I have problems with AD account to join ACS to an AD Domain because in the AD domain was created an account with the following features:Predefined user in AD. AD account required for domain access in ACS should have either of the following:•Add works...

We just migrated from a pair of PIX 515's running 6.3(5) to ASA 5510 running 8.2(3).We need to replace our remote client VPN configuration with one that integrates into Active Directory on Win2K3 server.Understand this can be done with Microsoft IAS ...

I am configured Cisco ACS 4.2 to authenticate wired network base on Active Directory windows 2003. I am used PEAP Authentication on the network and everything was OK but I have a problem : because there are restriction on User Account about log on t...

I have a router with the following aaa and tacacs+ config:aaa new-model!!aaa authentication attempts login 5aaa authentication fail-message ^CCFailed login. Five consecutive fails will revoke.^Caaa authentication login default group tacacs+ localaaa ...

Currently trying to configure 802.1x using PEAP for wireless access.  I haven't done this since using ACS 3.3 and I'm lost inregards to the certificate installation and all that good stuff.The setup is currently working with LEAP and EAP-FAST.The CA ...

Hi All, Can any one help me on Device authentication on ACS server. I have WI-FI setup with some lighteight access point & Wireless controller (WiSM). Now I want to controll device access like PDA can have limited access to network over wireless wher...

Hi Guys,              I need to upgrade my current acs 4.2.0 to 4.2.1, multi docs say that i can just download the software from the cisco web site. However, on the cisco web site I found two version non appears to be the correct one.1. ACS 4.2.1.1.1...

Hey therehas anyone else experience this problem? Is it my windows 7 flash player causing this?Thanks

Hi all experts.I am using ACS to provide authentication and accounting purpose. But when ACS is not reachable (tunnel is not up but WAN ip is reachable or something like that) i am able to login to remote router via local username and able to do leve...

First - I know ACS v3.3.4 is no longer supported.  We are getting ready to upgrade our first of 6 infastructures to v4.2, but with 40 of these around the world, it will take some time to get them done.  A variety of reasons has kept us from upgrading...