Network Access Control

Hi All,At our environment we use ACS 3.2 running on Windows 2000. I have a second ACS server that was never activated and I was now put in change of its activation.ACS 3.2 is installed on this second server. My question is regarding database replicat...

Hi Team,I am not able to change password on ACS clients in next log on. on ACS 5.1 getting below message.13041 TACACS+ authentication request switches from Login to Change Password functionality.Even i selected "Changed Password on Next Login"ACS Log...

Is there any way that authentication can be configured to use TACACS+ and local authentication simultaneously.  For example, most users will have user profiles and will be authenticated using a TACACS server, but a few accounts will be configured loc...

hello,i know its a stupid question, but i cant catch what i have to configure at the ACS so that eap tls works.i use the ACS to authenticate wirelss users. Futhermore i have a wlc 5508i have configured both with the correct ip adresses and the same s...

Hello,I have a problem to make a Cisco Router 2921 communicate to a radius server using PAP.Our customer is using SMSPasscode which requires Challenge response request using PAP only.It is working like that: the remote users are logging on the HUB lo...

Hello -I have made great progress configuring my ACS 5.1 for tacacs+ services.  However, there is one thing that is not working quite as I expected.  Instead of creating local ACS accounts for our network group I've decided to use the group setup in ...

I have been asked to setup an ID for our Tripwire application to access our network devices to check our configuration on a regular basis.  I was told the ID needed "enable" AND ability to do a  'show run'.  I am trying to use ACS 4.2 by creating a g...

Hiif we use an external radius for Authentication we have the demand that we control/filter the attributes which come from the external radius on the ACS51Is this possible, for example for 802.1x dynamic VLAN assigment. we want to control which VLANs...

Im getting strange error while logging into my ACS 5.1. It takes few times to login  though i enter correct username/password. Here is the errorAny helps would be great appreciation.

Hi all,having a problem with my new ACS 5.0 installation. I'm able to read the LDAP-directory and see all need groups.But when I logon to a switch, my policy-rule, which references to a ldap-group, does not match, it always hits the default-rule. If ...

Okay, this is bugging me to no end, so I figured I'd test the waters with it.Recently deployed an ACS 5.1 to my environmnet.For my WLC Access Policies to handle MAC and Users, I have the following defined for the RulesIdentity:Rule-1match PEAPmatch E...

Successfully completed re-imaging the ACS SE 1111 from v3.3.4.12 to v4.1. Moving onto the "Initial configuration" procedure - step10, the following error comes up after entering a encryption password for the Configuration store:Error: Failed to Chang...

Hello,I need to generate an overview of useraccounts that haven't been used for more than 60 days. I've tried the GUI and the csutil tool on our ACS3.2 and 4.2 servers, but neither seem to be able to output this information.I can only think of one op...