cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
21539
Views
25
Helpful
10
Replies

3750X netflow configuration.

Hello,

I have a 3750x switch stack and i want to know if I can configure flexible netflow with it.Do i need to upgrade the IOS?

#sh ver

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Thu 09-Feb-12 18:14 by prod_rel_team

Image text-base: 0x00003000, data-base: 0x02800000

ROM: Bootstrap program is C3750E boot loader

BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)

FR-PAR-JAC-PRODTECH-01 uptime is 44 weeks, 5 days, 6 hours, 24 minutes

System returned to ROM by power-on

System restarted at 13:28:52 CEST Sat Jan 12 2013

System image file is "flash:/c3750e-universalk9-mz.122-55.SE5/c3750e-universalk9-mz.122-55.SE5.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

License Level: ipbase

License Type: Permanent

Next reload license Level: ipbase

cisco WS-C3750X-48 (PowerPC405) processor (revision F0) with 262144K bytes of memory.

Processor board ID

Last reset from power-on

3 Virtual Ethernet interfaces

1 FastEthernet interface

104 Gigabit Ethernet interfaces

4 Ten Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address       : E4:D3:F1:C7:B1:80

Motherboard assembly number     : 73-12552-06

Motherboard serial number       :

Model revision number           : F0

Motherboard revision number     : A0

Model number                    : WS-C3750X-48T-S

Daughterboard assembly number   : 800-32727-03

Daughterboard serial number     :

System serial number            :

Top Assembly Part Number        : 800-31326-03

Top Assembly Revision Number    : B0

Version ID                      : V03

CLEI Code Number                :

Hardware Board Revision Number  : 0x04

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    1 54    WS-C3750X-48       12.2(55)SE5           C3750E-UNIVERSALK9-M

     2 54    WS-C3750X-48       12.2(55)SE5           C3750E-UNIVERSALK9-M

Switch 02

---------

Switch Uptime                   : 44 weeks, 3 days, 9 hours, 38 minutes

Base ethernet MAC Address       : E4:D3:F1:CC:3A:80

Motherboard assembly number     : 73-12552-06

Motherboard serial number       :

Model revision number           : F0

Motherboard revision number     : A0

Model number                    : WS-C3750X-48T-S

Daughterboard assembly number   : 800-32727-03

Daughterboard serial number     :

System serial number            :

Top assembly part number        : 800-31326-03

Top assembly revision number    : B0

Version ID                      : V03

CLEI Code Number                :

License Level                   : ipbase

License Type                    : Permanent

Next reboot licensing Level     : ipbase

Configuration register is 0xF

NAME: "1", DESCR: "WS-C3750X-48"

PID: WS-C3750X-48T-S   , VID: V03  , SN:

NAME: "Switch 1 - Power Supply 0", DESCR: "FRU Power Supply"

PID: C3KX-PWR-350WAC   , VID: V02  , SN:

NAME: "Switch 1 - FRULink Slot 1 - FRULink Module", DESCR: "FRULink 10G ST Module"

PID: C3KX-NM-10G       , VID: V01  , SN:

NAME: "TenGigabitEthernet1/1/1", DESCR: "SFP-10GBase-SR"

PID: SFP-10G-SR          , VID: V03  , SN:

NAME: "TenGigabitEthernet1/1/2", DESCR: "SFP-10GBase-SR"

PID:                   , VID:      , SN:

NAME: "2", DESCR: "WS-C3750X-48"

PID: WS-C3750X-48T-S   , VID: V03  , SN:

NAME: "Switch 2 - Power Supply 0", DESCR: "FRU Power Supply"

PID: C3KX-PWR-350WAC   , VID: V02  , SN:

NAME: "Switch 2 - Power Supply 1", DESCR: "FRU Power Supply"

PID: C3KX-PWR-350WAC   , VID: V02  , SN:

NAME: "Switch 2 - FRULink Slot 1 - FRULink Module", DESCR: "FRULink 10G ST Module"

PID: C3KX-NM-10G       , VID: V01  , SN:

NAME: "TenGigabitEthernet2/1/1", DESCR: "SFP-10GBase-SR"

PID: SFP-10G-SR          , VID: V03  , SN:

TIA,

Nicos Nicolaides       

TIA, Nicos Nicolaides
1 Accepted Solution

Accepted Solutions

jakewilson
Level 1
Level 1

Hello Nicos,

Does your 3750x has the C3KX-SM-10G module?  I believe you need it to export flows.

Jake

View solution in original post

10 Replies 10

jakewilson
Level 1
Level 1

Hello Nicos,

Does your 3750x has the C3KX-SM-10G module?  I believe you need it to export flows.

Jake

Nikos

When I checked the guide for NetFlow on 3750 I found this note

Flexible NetFlow is supported only on the Catalyst 3750-X and 3560-X switch running the IP base or IP services feature set and equipped with the network services module. It is not supported on switches running the NPE or the LAN base image.

So from an IOS perspective you are fine and should not need to upgrade your IOS. I am not clear whether your 3750 has the network services module that they describe.

Here is the link that I was using if you want to check it further

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_1_se/configuration/guide/swmnetflow.html

HTH

Rick

HTH

Rick

OK, it seems that i need the C3KX-SM-10G module instead of the C3KX-NM-10G i currently have.

TIA, Nicos Nicolaides

I would advise that even with that module, trying to get useful Netflow data on a L3 switch is often an unsatisfying endeavor. There are a number of limitations and caveats and they vary model to model and across IOS releases.

If at all possible in your environment you are much better off extracting Netflow data from a router.

Hi Jake

 

I am having the same module C3KX-SM-10G but still I am not able to configure the netflow. Can you please guide me on it,

 

Manik

I just had to go through this and I created a post with step by step instructions on how to get this to work.  I needed to setup NetFlow for several VLANs and used a SPAN to mirror them over to an interface on the C3KX-SM-10G.  We also had to create a loopback cable to get the fiber SFP to come up.  Hope this helps!

 

 

please suggest command to check availability of  C3KX-SM-10G module in the switch.

"show inventory" is the command. It also shows up in "show version"

please suggest the command to check  C3KX-SM-10G module

Can the C3KX-NM-10G export flows, or does it have to be the C3KX-SM-10G?