Network Management

Please help in creating config template for a multicaste routing. From Server: 192.168.11.12 Multicaste address:239.0.0.1/5000 To seven different Branch offices 1.172.16.0.0/24 2.192.168.201.0/24 3.192.168.10.0/24 4.192.168.11.0/24 5.192.168.12.0/24 ...

I have a large number of devices I need to add to ACS, I would like to import the data.

Hi could somebody tell me what these applications do:- Cisco Unified Communications Management Suite-Cisco IP Solution Center- Cisco Network Analysis Module v3.xI've looked on the website but couldn't really find what they do.Thanks

Hi,Anybody has any idea, how much bandwitdh would be required to monitor a CCM/unity server across WAN by an operations manager 2.0 server.Please sent me a relevant link if any.2.What configuration needs to be done on CCM for down.any software snmp a...

Hello,I am looking to gather network traffic using SNMP. The data I am really interested in is bits per second, the show interface summary command. I have figured out how to get ifIn/OutOctet using SNMP however I really want bits per second. Anyon...

We're in the process of bringing the new version of Cisco Works online and noticed today that in Topology Services > Network Views > LAN Edge View we're missing APs from our switch clouds. They show up in 2.6 for this view, but not 3.0.Anyone else se...

"OID not supported by device". This is the message received when Solarwinds Cirrus v4 attempts to read the RFC1213-MIB:System MIB>. Device is c3750e running IOS 12.2(44)SE1. Using SNMPv3 authpriv security level. Any idea why certain MIB-2 MIB's a...

Hi all. My coy has very high utilization for incoming traffic base on a basic graph that was provided to my company by isp to check for internet utilization. However i would like to know what ports on the foreign addresses are causing this high utili...

I am trying to implement CEoIP using the CEM-4SER module on a 2651XM router. I have been able to get the channels to sync properly. However, regardless of what I change in the IOS settings, I continue to get a 3-5% error rate during transmission. I h...

Ciscoworks LMS2.5.1 is not able to backup the config of a 4506e. The following error message is generated:>>>> CM0056 Config fetch failed for <hostname> Cause: CM0204 Could not create DeviceContext for 2762 Cause: CM0206 Could not get the config tran...

After a few months of observing a few issues (one being resolved by a new patch, thanks jclarke) with email alerting, I've narrowed the final issue down. Each time I have re-init'd DFM for various troubleshooting reasons, DFM will resume emailing ale...

I have been following the conversations regarding the various problems people are having starting topology services. I am have tried the recommended solutions and have had no luck.I am running CW on a Solaris 10 sparc box. It is up and tells me that ...