cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
348
Views
0
Helpful
2
Replies

Cannot ping or ssh to mgmt

Tania S
Level 1
Level 1

I have 3850s connected one as access the other as core, they are connected to a fortigate  and a remote network through an ipsec. I have internet access on user ports but am unable to ping or ssh to the management interfaces ive set up. Any guidance here?

1 Accepted Solution

Accepted Solutions

Ruben Cocheno
Spotlight
Spotlight

@Tania S 

Check your Policies over VPN

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

View solution in original post

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame

It all depends on where the connection intiating from  ?

is this from LAN segment or coming from IPSEC tunnel.

If the Lan Segment what is the IP of the client, what is the devices IP address ? if they transit via Fortinet firewall then check the Logs on FortiGate FW when the connection initiated.

same case if the traffic coming via IPSEC then check the traffic logs on Fortigate FW.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Ruben Cocheno
Spotlight
Spotlight

@Tania S 

Check your Policies over VPN

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

Review Cisco Networking for a $25 gift card