cisco nxos syslog configuration

[soheil.amiri@Live.com]

hello every body

i try to configure syslog client on my cisco 3064 nexus switch by this command

#logging server 192.168.3.250 5 use-vrf management facility syslog
#logging monitor 6

bu nothing is send to my syslog server.i have 5 more 2960 and they are working fine. but none of my nexus device are sending or generating syslog message.

what is the mistake ?

[balaji.bandi]

when you using "use-vrf management" is this VRF aware how to reach syslog server ?

try ping 192.168.3.250 using source use-vrf management

[soheil.amiri@Live.com]

yes, the server respond

as-media-R22# ping 192.168.3.250 vrf management
PING 192.168.3.250 (192.168.3.250): 56 data bytes
64 bytes from 192.168.3.250: icmp_seq=0 ttl=127 time=7.134 ms
64 bytes from 192.168.3.250: icmp_seq=1 ttl=127 time=0.845 ms
64 bytes from 192.168.3.250: icmp_seq=2 ttl=127 time=0.85 ms
64 bytes from 192.168.3.250: icmp_seq=3 ttl=127 time=1.38 ms
64 bytes from 192.168.3.250: icmp_seq=4 ttl=127 time=1.31 ms

--- 192.168.3.250 ping statistics ---
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min/avg/max = 0.845/2.303/7.134 ms
as-media-R22#

[marce1000 · Accepted solution]

      - FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCua92174

 M.