SNMP on 9000 switches

[benolyndav]

Hello

We currently pointing our 9000 switches at DNAC for snmp, Is it possible to add another SNMP destination on the 9000 switches so they would send to 2 destinations.??

Thanks

[balaji.bandi · Accepted solution]

For SNMP query any device can query cat 9K switch as long as community information and ACL(if you made any to match with the I)

SNMP traps  - you can send different destinations :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-11/configuration_guide/nmgmt/b_1611_nmgmt_9300_cg/configuring_simple_network_management_protocol.html