cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
443
Views
5
Helpful
1
Replies

SNMP on 9000 switches

benolyndav
Level 4
Level 4

Hello

We currently pointing our 9000 switches at DNAC for snmp, Is it possible to add another SNMP destination on the 9000 switches so they would send to 2 destinations.??

 

Thanks

1 Accepted Solution

Accepted Solutions

balaji.bandi
Hall of Fame
Hall of Fame

For SNMP query any device can query cat 9K switch as long as community information and ACL(if you made any to match with the I)

SNMP traps  - you can send different destinations :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-11/configuration_guide/nmgmt/b_1611_nmgmt_9300_cg/configuring_simple_network_management_protocol.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

1 Reply 1

balaji.bandi
Hall of Fame
Hall of Fame

For SNMP query any device can query cat 9K switch as long as community information and ACL(if you made any to match with the I)

SNMP traps  - you can send different destinations :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-11/configuration_guide/nmgmt/b_1611_nmgmt_9300_cg/configuring_simple_network_management_protocol.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking for a $25 gift card