Solved: snmpset vmVlan does not work on active ports

snarf65 · ‎07-27-2005

L.S.

as above,

when i apply to an inactive port it works fine, since all my ports are active due to wakeonlan capable nic's this is a problem.

pls enlighten me

thanx in advance

Frans Verschoor

steve.busby · ‎07-29-2005

Hi Frans,

I'm not finding anything that could contribute to this, can you possibly upgrade one switch to (12.1(22)EA5 or 12.2(25)SEC) and test on that?

If it's successful then you have your answer, if not, it may be time to open a Cisco TAC Case.

Steve

steve.busby · ‎07-29-2005

Frans,

What hardware platform & software version(s) are you seeing this on?

Steve

snarf65 · ‎07-29-2005

steve,

currently i'm working on cat3550 with 12.1(13)

is that a known bug?

thanx in advance

Frans

steve.busby · ‎07-29-2005

Hi Frans,

I'm not finding anything that could contribute to this, can you possibly upgrade one switch to (12.1(22)EA5 or 12.2(25)SEC) and test on that?

If it's successful then you have your answer, if not, it may be time to open a Cisco TAC Case.

Steve

snarf65 · ‎08-09-2005

Steve,

Thanx it did the trick

Frans