09-05-2022 09:15 AM
Hello Folks.
i deployed a SSM on Prem Version 8 High availabilty cluster and as far as i can tell it's working.
Now i have a specific question regarding the upgrade process of the cluster.
I read that for upgrading the Cluster one has to tear down the cluster - this creates stand-alone nodes again -> upgrade the nodes -> form the cluster again.
I have read here - SSM On-Prem 8.X High Availability Cluster Working - Cisco - that the secondary node must be discarded and cannot be reused:
Quote:
"After you verify the SSM On-Prem’s operation, the Secondary/Standby server must be discarded and cannot be reused."
So - what does that mean ? Do i have to completly reinstall the secondary node from scratch from a ISO file before i form the cluster again ?
I read all the guides for the SSM on prem, Install guide, User guide, and so on - but couldn't find a satisfying answer.
Thanks in advance for your assistance.
Regards,
Alex
Solved! Go to Solution.
09-05-2022 09:42 AM
That is for downgrade. For upgrade you break the HA and upgrade and join them back.
09-07-2022 08:07 AM
Glad our suggestion helful, if all good we mark as resolved, so this will helpfull for other community members if the same scenario comeacross.
09-05-2022 09:42 AM
That is for downgrade. For upgrade you break the HA and upgrade and join them back.
09-07-2022 01:38 AM
Thanks balaji,
okay - i did break the cluster - upgraded the nodes and formed the cluster again. Seem to work.
Thanks again.
09-07-2022 08:07 AM
Glad our suggestion helful, if all good we mark as resolved, so this will helpfull for other community members if the same scenario comeacross.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide