cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
345
Views
5
Helpful
1
Replies
Highlighted
Beginner

SVIs and Spanning Tree

Topology:

SVI.PNG

Question Regarding Spanning Tree and SVIs on a Full Mesh Metro E/ EoMPLS setup.

1. What will be the issues if spanning tree is filtered on the spokes (10.10.5.2 and 10.10.6.2), as primary communication would be via IGP routing thru the use of SVIs

2.  Is the topology susceptible to L2 floods if the switch is acting as a router via an SVI?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

as per the diagram, i do not see any L2 Loops here. Hub always needs to be the spanning-tree root and IGP for  DR router. Spoke need to be listener all time.

 

 

BB
*** Rate All Helpful Responses ***

View solution in original post

1 REPLY 1
Highlighted
VIP Mentor

as per the diagram, i do not see any L2 Loops here. Hub always needs to be the spanning-tree root and IGP for  DR router. Spoke need to be listener all time.

 

 

BB
*** Rate All Helpful Responses ***

View solution in original post

Content for Community-Ad