Hello.
We moved the NAM-2 to a different slot in the same switch, from slot 13 to slot 2.
Previously, we removed a CSM-S from slot 2.
sw-core12#sh mod 2
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 8 Network Analysis Module WS-SVC-NAM-2 SAD074005MD
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
2 0003.feac.d3ac to 0003.feac.d3b3 2.0 7.2(1) main_dev@1.1 Other
Mod Online Diag Status
---- -------------------
2 Unknown
sw-core12#
Trying to power up it, after some minutes we receive these messages.
sm(cygnus_oir_bay slot2), running yes, state wait_til_online
Last transition recorded: (timer)-> check_power_on (power_on_ok)-> wait_til_online (disabled)-> disabled (disabled)-> disabled2 (disabled)-> stay_disabled (operator_power_on)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
sw-core12#
Apr 13 11:44:33: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Module Failed SCP dnld)
sw-core12#
Thanks.
Andrea
