Network Security

Hi,We have an ASA 5520 running in front of our web farm. We now have 5 public IP's that need to be forwarded to 1 internal IP, on the same port.Our network guys tell us this is not possible !? Any ideas ??Txs,Stefan

Hi all, can anyone tell me how the general firewall is setup, do most people use them inline with the network, or are they mainly used for NAT and have say an external ip on there. Could I have one internally on my network, with say 1 network subnet ...

Hello,I have a question about configuring an access list? Can you use computer names instead of ip addresses. We have a pix in front of our SQL servers and workstation PC's that need to access the SQL servers are assigned DHCP addresses.

hi,in the configurator, there is no option to add the ASA-SSM-AIP-10-K9 to the ASA5510-SSL250-K9. please advice if this is possible.Thanks,Elsy

Hi Sir,Please refer to attached network diagram.Logically and functionally, there are two networks: Network 1 and Network 2. Core switches of both networks are co-located at each 3 core data centers. Both networks run EIGRP in the same AS 100.There's...

I am trying to run H323 videoconferencing through an ASA5520. I have configured the ip inspect for H225 and RAS, but the RTP stream from the far end tries to connect to the internal address. Originally I thought this bug was the culprit, but since th...

When is 8.0 expected?Thanks,Tim

I am currently running a PIX 535 running 7.0(4) code and was wondering if there was a way to get a list of the top number of flows from local-hosts? I know the local-hosts command will display in the information but am hoping that there is a way to ...

Does pix535, powered by 7.2.2 engine, support 14 interfaces? It worked well in 6.X version. Does anybody has practical experience? Unfortunately I don't have enough interfaces at this moment to figure things out manually:(

Hello,i've just started working with cisco pix firewalls. I currently have a question i need to ask regarding a client's requirement. There is a server behind the firewall with an outside address of 10.1.2.113 which resolves to 192.168.136.1 on the i...

"The number of ASDM sessions has exceeded 5. Please try again later". I receive this message whilst trying to access the ASA5510 using the ASDM Launcher. Tried console access and asdm disconnect but it didnt help. Any ideas?

Hi All ,I am very new to Firewall. I have Cisco PIX 515E , I want to know regarding configuration of 515E & also want to know what happens with command fixup protocol , failover ip address outside,failover ip address state & how to use access list in...

Hi,I have a situtation where I have web servers with public IP addressess that I'm going to migrate behind one address, but behind different ports.Can I do port forwarding with ASA so that when connecting from network 0.0.0.0 to port 80 on ip x.x.x.x...

I have the need to open UPnP for all internal devices behind a PIX 501. How can this be done with a PIX?