Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I have two ASA5545 and two catalyst4507 switch. Switches are in vss mode. I have to cluster both  the ASA through switch. Configuration is as below:- ASA-2# sh run clustercluster group ASA-CLUSTER local-unit ASA-2 cluster-interface Port-channel10 ip...

veevekraj by Level 1
  • 1577 Views
  • 3 replies
  • 0 Helpful votes

What are the parameters other than CPU, Memory and Storage that should be monitored on Cisco IPS in order to do capacity planning effectively. Currently IPS4270-20-K9 and ASA5585-SSP-IPS60 are active in the production environment.

kmittal by Cisco Employee
  • 2084 Views
  • 1 replies
  • 1 Helpful votes

I have an existing failover pair of two ASA5545-Xs. I want to add Firepower to them. They don't have SSDs. First to add SSDs to them, do I need two ASA5500X-SSD120=  ? One per device? Or do I need two per device (so four in total)?  Second to add F...

Hello Whenever I try to upload a Sourcefire_Snort_Engine_Upgrade-1650-vrt.sh on Cisco firepower management center 6.2 , it fails and an upload error occurs. I could upload Sourcefire_Rule_Update-2017-05-09-001-vrt.sh, Sourcefire_Geodb_Update-2017-05-...

MKH by Level 1
  • 1339 Views
  • 1 replies
  • 5 Helpful votes

Hi Team, Kindly request your advice on how the Licensing work in Sourcefire. We got FMC 2000 running in our network and purchased two 7030 and 7125 Sensors. With the same License has been received (Control+Protection) and with that PAK we have downl...

MR33 hooked up to an MX64. (see pic) So I'm sharing my wireless with someone in my apt building. I am limiting his bandwidth to 5Mb but have Speedburst enabled (MR33 - firewall and traffic shaping). When checking the historical graph data, it appear...

alceryes3 by Level 1
  • 677 Views
  • 0 replies
  • 0 Helpful votes

Hi guys, I currently have one ASA configured with two tunnel-group - both using username and certificate authentication for AnyConnect users. this is working well. My question is what if there is another requirement for external users to be authentic...

Junnan Wu by Level 1
  • 367 Views
  • 1 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card