Network Security

So I just recently setup a Cisco 5506-x with firepower services, but it changed my CLI once the console was enabled. Am I able to change back to the original CLI from this?So it went from ASA#to >

Hello,we have bougt several new 5508-X series firewall. Those are initially configured as a local and now we want to integrate them into  virtual firesight management system. We have got proper license and already update the firesight system to add t...

OK. I know that I am missing something simple here.I am trying to get an ASA5505 running IOS 9.1(4) with a base license to work with dual ISP's. My configuration looks good but the SLA command is in a constant state of failure.The only thing I have n...

Dear Experts, is there a way to add a dns keyword to the existing static NATs without interrupting traffic flows or removing the entry?I am getting this error when trying just to past the second line with dns keyword in cli:ERROR: mapped-address conf...

We have internet bandwidth 4/4 Mbps on outside interface. To inside  interface are coming few internal network. How to limit internet  bandwith usage for let's say 10.1.103.0/24 network to use 100/100 kbps.  We tried as shown below but without luck. ...

Can you exclude network traffic from being processed by the sensor so that it doesn't impact the load on the appliance? For example, if you have an 5G appliance with 10G ports inline with a network and you want to only process certain traffic. Can yo...

Hi, I'm looking for a solution to block bittorent and P2P traffic throught my ASA 5510  Thanhks for your help.

Hi,I have been given the task of configuring an ASA 5505 from scratch and been wrestling unsuccesfully with it now for over a week.  The scenario is 3 vlans outside, inside and dmz. dmz has one fixed ip server (at the moment)what i need to get to is:...

What is the throughput of a CX module within an Asa 5525-x?Can't seem to find what it is through the module.Thanks

Hi,I configured VPN Client on cisco asa and it's now connecting but I encountered some issues. 1. I can't ping the inside lan of our network (servers,host etc).2. I can pint the inside interface of ASA 10.1.1.1. please see the atttache file. thanks

Hello We are in the process of migrating our datacenter switches to nexus family.  After swapping the old network devices with new nexus switch, the ASA FW seems to show below messages in the log,  %ASA-4-405001: Received ARP request collision from I...

I have a cisco ASA implemented on transparent mode, using subinterfaces and vlans the traffic pass through the cisco ASA is be working correctly. But I can't to do ping between different vlan only between host the same network or the same vlans.inter...