Hi,we recently update the contract to get updates for the IPS, but we are getting the attached error message when we try to get the updates with the cisco username and password that contain the contract.anybody knows about this error?
Hi, I have two ASA firewalls working on fail over, a vPC is configured between firewalls and two nexus switches. vPC is up and port channel is configured. Now I made a virtual interface on firewall as inside interface and assign a vlan id 15 same as ...
Dear Friendz, Currently we are using ASA 5525 in Active-Standby pair (Firmware - asa922-4-smp-k8.bin) and planning to upgrade the same, aware about the firmware up gradation process but would like to know about rollback (revert or downgrade steps) . ...
Dear Friendz, Currently we are using ASA 5525 in Active-Standby pair (Firmware - asa922-4-smp-k8.bin) and planning to upgrade the same, aware about the firmware up gradation process but would like to know about rollback (revert or downgrade steps) . ...
Hi,Does anyone know whether it's possible to import values into a variable set? We're working with a system that has hundreds of networks in variable sets for variables such as 'internal networks' and 'external networks'. Ideally we'd like to import ...
On one of my 8 ASA Firewalls I get the Following about 800 times a day.%ASA-2-106017: Deny IP due to Land Attack from <ASA's Outside Interface Static IP> to < ASA's Outside Interface Static IP>It happens pretty much several times every hour pretty m...
I have a customer on a sub interface I am trying to police. They are sending too much traffic accrossa L2L VPN. I have the policer set right and it is dropping traffic but I am still seeing 160Mb/s whenI want to see 75Mb/s. service-policy customer-...
Hello,I have a ASA with a license AnyConnect Premium 25 (see sh activation-key). Having the need to increase the number of users who use AnyConnect we go from 25 to 50. The management license has since changed, now for the AnyConnect client 4.x licen...
Hi There,I have a new Cisco ASA 5505 Firewall and need to open some ports but it is being a pain.We are using Cisco ASDM GUI to change access rules but when we open ports it doesnt work.What we are trying to do is open ports 80 and 443 so we can move...
We are intending to purchase a new ASA 5512-X to replace our current ASA 5510 firewall. The current hardware is running software version 8.2. Our online research has indicated that we need to upgrade (at a minimum) to version 8.4.2 before we can pe...
Hi Friends,I installed more than 3 ASA5506 with Firepower on my customers, and all of then occurs the same problem, always on Report show "Not Available" or "Unknown".Someone get success to fix this problem???
Hi community I got a Cisco 897 VAW and I'm wondering if it's a G2 router. When yes, I should be able to configure ScanSafe on it correctly?Also If I wan't to learn how to configure ScanSafe on it, should I proceed with the official manual? I saw the ...
Hi Experts!I'm wondering if the FastEthernet mgmt port on the ASA 5540 can be configured as routed port? Or is it purely for out-of-band management?Thanks
* PRODUCT TYPE (Model Number): CP-DX650* EXISTING ACTIVE LOAD:sipx650.10-0-2-24* BRIEF PROBLEM DESCRIPTION: We need to remove the administrator / screen password in the IP Telephone model DX650.In the cisco community forum it says that in the latest...
The environment I work uses the following switchport portsecurityswitchport portsecurity max #switchport portsecurity age time 2 and in my CCNA class they talk about using switchport port-security mac sticky(May or may not be right syntax). Does this...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-05-2026 10:49 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM |
