Hi GuysI want to clear unused acl rules using hit counts to identify what acls are in use. The problem is when I do show access-list any acl using an object group splits into several lines, showing an acl for each member of the group with the same li...
Hello, I have an ASA firewall (a 5550) running in routed mode with three different IPs on it and it is doing fine. Now people want to change the config to transparent mode, with two inside interfaces and one outside - so the two inside networks woul...
Dear ALL, I have an ASA 5520 with 60% CPU usage related to dispatch unit.I am going to buy a new ASA.How can I compare ASA models based on their dispatch unit processing capacity? ThanksAli
Hello, I understand that "ip dhcp snooping" turns on the snooping capabilities and you have to trust a link for a dhcp.I just don't understand the ip dhcp snooping vlan ## command. can someone please explain this command.
Hi! I'm having some problems with understanding the design of virtual IPS/IDS.I know how to do it with hardware IPS/IDS, when you have one physical interfaces specified to handle traffic and another physical interface to to send inspected traffic bac...
Hi, I need help with a DMZ on our edge network and a ton of web servers that are in the DMZ from two different /24 subnets..We have 2 x /24 public subnets that are routed to us from our ISP (63.241.163.0 and 63.241.172.0). Our ISP routes them to our ...
Hi Guys, I'm sure this has been asked before but i can't find the answer, My client wants to run 2 ASA's as HA pair with a ASA5500-SSL-10 license installed will he need a license for both machines or just one Many Thanks
I need to connect a device to make Internet cache (CacheFlow) with a single interface using a Cisco ASA Firewall PBR to redirect user traffic on the LAN. The device that makes cache, necessarily requires the PBThe flow of information must start from ...
I've seen mixed configurations where someone will explicitly create an inspection rule using an intrusion policy and then other cases where someone has created an inspection rule only for files (no intrusion policy) but then configures the intrusion ...
I have two cisco asa 5516-X in failover. How to make so that failover on worked on a module sfr status?
hi,firstly i don't think that we have any problems with two kind of licenses. but i found that, if i also have Firepower and ASA firewall in data center, there are some issues below:.If you buy IPS subscription license on FirePower, BotNet update on ...
We have a PIX with 3 interfaces. Inside, Outside,DMZ.On my DMZ we have some clients that come in and remotely connect back to there office via MSPPTP. I setup the ASA with this to get rid of the error message: regular translation creation failed for ...
I am attempting to perform ASA Hair-pinning.My Co-location Network consists of the following:1. 2 Cisco ASA 5512 configured in HA Mode.2. 2 Cisco Catalyst 3560 Layer 3 configured in Stack Mode.Catalyst 3560 switches consist of the following 2 VLANs:1...
We are looking to purchase at least two Cisco 6500 series switches with the latest sup engines as-well-as the Cisco ASA service modules.My question is, could we have the all of the following in the same box and place this setup at the perimeter?BGP ...
Hello,I have a newly installed (90 Days) 5512-X. We have had two things happen recently and I am not sure why. The first is that Anyconnect client will not work on a single Mac that I have. It works on some but not one in particular. I opened a c...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-24-2026 08:00 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM |
| User | Count |
|---|---|
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
