Network Security

Hi This ASA has a command -- http server enable 555. With ASDM, how to launch it to log onto the ASA? I tried to type x.x.x.x:555 in that window, but it did not work. I guess something is wrong. That is why I hope someone can confirm what i did. Than...

Hi, I setup debug in failover ASA as below. I cannot see any debug message through SSH. Anyone can take a look at my config ? Thank you terminal monitorlogging onlogging console 7

I have a 5506-X running 9.4.1 and would like to ask for help on creating the following ACL's.Thank you, Service       Port                      Protocol  Direction  DNSSIP+TLS    5061                     TCP         Out     SRTP        10000 - 65534 ...

http://www.amazon.com/Cisco-ASA5505-BUN-K9-ASA-5505/dp/B000O0Z8GC/ref=sr_1_1?ie=UTF8&qid=1435380413&sr=8-1&keywords=ASA5505http://www.amazon.com/Cisco-ASA5505-UL-BUN-K9-5505-Security-Appliance/dp/B000JVTTPM/ref=sr_1_2?ie=UTF8&qid=1435380413&sr=8-2&ke...

Hello: I already have an Asus wireless router and an unmanged switch setup at home.Can I purchase a Cisco Rv110w and use it as a Firewall?How should I install it within my network? Thank you.

Hi, i'm newbie to cisco asa,  but i have an experience in administering different firewall before (freebsd, watchguard)..I thought this setup would be a piece of cake in ASA but im stuck on this one for 2 days already so here is my topology, Internal...

Hello,I'm not sure how the following is working. asa5525anyconnect version 3.1windows server 2008R2When you come in via VPN I send clients to the windows server for DHCP/DNS info and records get created in the FLZ and RLZ. When folks disconnect from ...

Hi,   I'm currently trying to setup a VPN IPSec tunnel with an ASA (9.3.1 version) with a SaaS proxy provider. In order to only redirect web traffic I've been using extended acl matching services http and https for redirection in the tunnel.   Howeve...

Hello Guys,I would like to know major difference Between Router vs Firewall, why we use firewall even Router has capability to do that now a days,why someone will deploy firewall in the Network?what are the Key features in Firewall that are not avail...

Hi,I have several SSM-10 IPS sensors (inside ASA5510 firewalls) and I'm trying to get it to send status changes & notifications via SNMP to our Syslog server (Solarwinds). I have enabled SNMP Traps under "Config>>Sensor Mgmt>>SNMP>>Traps Config"  I h...

Hi Guys, I have a static nat for public-to-private as shown below on ASA 8.2 however I have users accessing this private-ip (10.0.10.245) via MPLS link.Users have a complianing there is a traffic loss. static (inside-10,outside-48) 116.19.49.52 10.0....

I am trying to configure sub interfaces on a Cisco ASA running v7.2 but it will not let me use the sub interface command?

Hi Experts, Can we make sub interface on Cisco ASA 5505 model and if its possible then do that interface need to be upgraded into Trunk Port. Pls explain briefly. Thanks

Hi all, I'm trying to configure  IPv6 policy map in my Cisco PIX 515e 8.0(4). The guide says:policy-map type inspect ipv6 nameciscoasa(config)# policy-map type inspect ipv6 ipv6-map But I don't have that option in my CLI PIX5151e(config)# policy-map ...