Hello everybody, Please, I need to know the prices for the items: ASA5500X-SSD120= FS-VMW-2-SW-K9 L-ASA5525-TAM= I need to implement Cisco IPS with 2 Cisco ASA 5525X. Thank you.
Hello everybody, Please, I need to know the prices for the items: ASA5500X-SSD120= FS-VMW-2-SW-K9 L-ASA5525-TAM= I need to implement Cisco IPS with 2 Cisco ASA 5525X. Thank you.
hi!we have installed two cisco ips 4260 in our test environment and want now to monitor the inspection load, which is from my point of view much more important than the cpu load, with the open source network tool cacti. I want to send alerts when a s...
Hello,I know this has been going on for a long time, but I'm facing the traceroute issue in the ASA. Weirdly enough, I can reach the destination using traceroute with no problem, but I can't see the path to it. I pasted the result below.I also checke...
Hello Cisco Team,I would like to seek your assistance on how to install and configure the Web security essential and And application visibility control license from the ASA5512-SSD120-K9?Do you happen to have a PDF documentation guide and process on ...
Hi I have a few questions about License Portal. Questions:1. When will https://keyserver.sourcefire.com/ be terminated?2. When should the users be start using Cisco License Registration Portal: www.cisco.com/go/license ?3. When should the users be Qu...
I'm Currently running 9.1.3ED on ASA5505 and planning to upgrade to 9.2.2.4. Can i upgrade to this version, or 9.1.5ED or 9.0.4ED?If 9.2.2.4, i can upgrade straight from 9.1.3ED to 9.2.2.4? Thanks
Let's say there is a outside IP address of 1.1.1.1 and I want to get to a piece of equipment on theinside of the network with an IP address of 192.168.168.234 and use TCP port 3000.So I try to go to http://1.1.1.1:3000 and get to that piece of equipm...
Hi All, I have been trying to make SNMPv3 work on IPS module on our ASA 5525 but having following issue, - Cannot find the snmpv3 configuration on the IPS GUI interface Even though conf document said you can do it from GUI from version IPS 7.2(2)E4 ...
Hi there , I'm running an ASA 5510 and am trying to backup the config to a backup unit for testing . I'm having problems exporting the CA certificate . I've done this in the past with no issues. when I run the crypto ca export LOCAL-CA-SERVER pkcs12 ...
I have this ASA:Cisco Adaptive Security Appliance Software Version 8.4(4)Device Manager Version 7.3(1)101Compiled on Mon 21-May-12 10:48 by buildersSystem image file is "disk0:/asa844-k8.bin"Config file at boot was "startup-config" Hardware: ASA550...
I want to run active active failover in transparent mode on asa 5545 with IPS. I want to know whether multicast traffic will be allowed to pass through the firewall in this scenario.
Hi,I have ASA 5510 firewall with security Plus bundle license is running in our production environment and i am now buying another box for Standby Firewall so as per my understanding the standby should be same as the active one firewall.Below are the...
Hi Guys, Is it possible for sourcefire to act as proxy for the http traffic?? thanks Nitesh
We already have ISE IPN on this ASA for our VPN users, but now we want to migrate it to be our Internet firewall as well. The issue we have is that for the IPN to work, the 'inside' interface of the ASA and the 'outside' or 'untrusted' interface of...
Hello,I'm looking at upgrading my ASA to the newest version 9.0(3) . I am currently running on version 8.2(2) of the software. I know 8.3 introduced some major changes . I've been looking into the upgrade path and want to know if I can upgrade 8.2(2)...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-20-2025 03:07 AM | ||
| 11-20-2025 02:12 AM | ||
| 11-19-2025 04:51 AM | ||
| 11-18-2025 12:11 AM | ||
| 11-13-2025 12:52 PM |
| User | Count |
|---|---|
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 2 |