Network Security

Hi all, I am looking for information regarding rediscovering our new ASAs with CSM once we upgrade. We will be going from a Cisco 5550 to at Cisco 5585-X and I am curious that if I give the new 5585-X the same configuration as the 5550 that I can sim...

Hi There.I want to achieve DNS rewrite for my users at the inside interface (192.168.0.1/24). So when they to reach www.myactivedirectory.com 7.7.7.7 (on the mypages interface) the ASA should translate/rewrite 7.7.7.7 (orginal request) into 8.8.8.8 (...

i don't want translate inside network segment (172.31.20.0/24). I want it to be able to communicate with outside segment(172.16.54.0/24). How should i configure?      (172.16.54.0/24) outside<<<<firewall>>>>inside (172.31.20.0/24)                    ...

I signed up to SureWest internet for 30meg up and 30meg down internet service for less than 50.00 per month. They said I could get some static IP's so I got 3 statics.My problem is - When I set the static NAT up it seems to work fine for about 4 to 8...

I have a 5585 ASA firewall, how could you see to the maximum number of session, thank you!

Hi,ASA5510 8.2.5(50)The Dispatch unit process is contantly having high cpu usage for last 10 hours.Things checked:1. show proc cpu-usage2. show perf     It seems fine . Output attached3. Show interfaces for error    No error, overruns, underrruns on ...

I have a 5585 ASA firewall, how could I see to the maximum number of session.thank you!

Hello All,Could anyone please let me know the difference between below two NAT configurationStatement 1nat (dmz) 2 10.70.0.0 255.255.255.0global (out) 2 192.0.2.0-192.0.2.20 netmask 255.255.255.0  Statement 2nat (dmz) 2 10.70.0.0 255.255.255.0global ...

HiI have an ASA 5515 with a INSIDE interface, GUEST interface, WAN1 (fiber with public ip's pool) and WAN2 (ADSL with public IP).I would like GUEST interface to use the WAN2 ADSL, and my INSIDE Interface to use the WAN1.Is it possible ? In my dream, ...

Hi all,In my scenario I have a remote server communicating with a private local server open to the world via static NAT.Remote server: 1.1.1.1ASA Outside: 2.2.2.2ASA Inside: 192.168.1.254Private Server: 192.168.1.100I have configured static NAT to al...

Hi all, Notebook -- ASA -- Checkpoint -- Server I'm trying to demonstrate failover behaviour which with site-to-site VPN traffic in the test lab. ASA is using 5510 version 8.2.5. I'm keeping to ping the server from notebook side. Then I rebooted the ...

Hello,I'm trying to figure out what the default privilege level is for users that are authenticated to the ASA via a remote authentication server when using the ASDM.the command "aaa authentication http console TACACS+ LOCAL" is used in the ASA confi...

 Hi I have two ASA 5200's in a active\active pair running 8.2. The power was lost to the primary device, was restored. but now the configuration, ip addreses etc are old (over a year). what would cause this? When ever we make a change ot the config i...