Network Security

Hi,I have Asa 5505 conected to link ADSL the public ip address is dinamic,I create one domain in DYNDNS and I configured ddns in the asa to conect by name of domain I have configured it in the router whit http method and this work fine, but in the as...

                   Hi,I need to enable following command in ASAcrypto isakmp nat-traversalsysopt connection permit-vpnAs per our standard,Pls suggest what things we need to check before & after implementationWhy the commands are used forBr/Subhojit

I have an ASA 5505 with a base license currently running in my office. It serves as the firewall and router for my guest wireless network that has a dedicated internet connection that does not touch the corporate lan. Currently there is an Inside int...

Hello all,New to the forums and the relatively new to Cisco ASA 5512.  Particularly utiilizing the ASDM gui config.I'm trying to setup the ASA to allow LDAP sync for a new SPAM/AV Email security service and running into an issue that I'm sure is a si...

Hoping someone can help me figure this one out...Inside GE0/0 M.M.M.M---------------ASA-----------------Outside N GE1/0 N.N.N.N                                                         ----------------Outside P GE1/1 P.P.P.PGlobal (Outside N) 1 interf...

Hello Everyone,I can VPN into my home network just fine however when I try to access my NAS, 192.168.5.20/445, the firewall is blocking it.  Sometimes it works, other times it does not.  Typicall I will VPN in with my iPAD or laptop and try to access...

Hi everyone,Can  anyone please let me know what exactly I have to do to ping the other network ip address. As we have PIN(136.141.21.254) and PAN(10.0.16.254) as two networks . We have only one security level and that too we have  applied ACL's  in s...

Need the details of the Public IP’s which are hitting Web Server i.e. Ingress Traffic from Internet (Outside) to Inside.The IP details should be in Syslog server.

                   Can we have multiple virtual sensors on IPS with ASA5510 and 5520 (single context).

I have a Cisco ASA 5510, Cisco 3560 switch, and a couple of servers installed at a remote location.  I can't ping the ASA or 3560 switch, but I can ping the server behind it.  Why would this be and how can I fix this?

Hello,I want to copy contents of 1 ASA 5510 to another 5510.Both ASA has same license.-I tried to connect to 2nd ASA via console cable-Went to "Conf t" and copied config of 1st ASA. [ using paste tab from Hyper Terminal ]- used commands like copy run...

Hi,I have a question about static nat statement and the IPS module. Customer says that there was a brute force attack against a server on port 3389 RDP.The IPS did not report any attack in progress, nor does it show in history there was an attack.I t...

It should be simple, but I cannot get it.  I want a device on 10.50.3.0 to access ASA management interface at 10.50.0.1.ASA Version 8.0(2) !hostname ciscoasadomain-name default.domain.invalidenable password ___ encryptednamesname 10.10.10.70 S2_serve...