Hello,I'm new to the new NAT statements in the ASA configs. I've held off as long as I could, and now I am configuring a shiny new ASA 5525-X to replace our older 5520. Alas, I cannot hold off any more.My question is, when I upgraded our ASA 5520 t...
Hi,I've got an ASA 5510 8.2(1) and have to move to a /31 Internet address. Is the ASA capable of it?Thanks.
Hello, I'm an Administrator and have a client that is running a T1 (point to point) with a 501 Pix box as the firewall between the Dsl and internal network. We are switching over to Fiber Optic (Client has 3 locations all tap into a central datab...
We have an Active/Standby ASA5540 firewall set-up with the Primary Active unit at our head office site (Site A) and the Secondary Standby unit at our DR site (Site B)Both sites had their "outside" interfaces directly connected to our ISP (We connect ...
I'd like to limit port forwarding to an inside IP so that only one specific /24 from outside can use that portright now any outside (public) IP can use the port.IP's for examples onlylimit outside Public IP's to 192.168.2.0/24 instead of anyport 4444...
First, some background.I started out a number of years ago using the Pix 501s. Now I am using ASA 5505s. I know enough to be dangerous, but not enough to be useful. That being said, assume I know nothing, as this is largely the case. I have a basic u...
DearI have using 2 ASA 5510 to make IPVPN tunnel. From my experience. I tried to used ONLY ikev1 are working fine. or I tried to used ONLY ikev2 are working fine for the tunnel connection. So, any suggestion for me to keep using ikev1 or need to c...
Hi, I wanted to know the maximum VPN client sessions (using the Cisco VPN client) and Site-to-Site VPN tunnels that I can connect to my ASA 5505 simultaneously. In other words, if I have x VPN clients and y Site-to-Site tunnels, at any time, does...
Hi all,I have an ASA 5510Cisco Adaptive Security Appliance Software Version 8.2(1)Device Manager Version 7.1(1)52Compiled on Tue 05-May-09 22:45 by buildersSystem image file is "disk0:/asa821-k8.bin"Config file at boot was "startup-config"Hardware: ...
Hi,I have a CIsco 2921 running IOS 15.3-3.M1. I am trying to create a zone based firewall rule to permit ssh traffic from any host outside my network to use NAT to forward port 8222 to 22 to connect to a specific server inside my network (192.168.10...
I believe I am seeing an asymmetric routing issue but not so sure. ASA version 9.1(1)We have the management interface (management-only configured) connected to an upstream router. Management default route out is towards this router ( and also its IP ...
We have asa's at our hotels. We have a brand network and our local network. I am trying to get the 172 nw to access the opera server and back. The given us a port on their netgate to access the server and assigned it the 172.16.10.200 address. I had ...
hi,I have Cisco ASA 5510 8.0(5)I have configured port forwarding. it usage second ip address. i want allow ping to second ip address. how can i do?
Hello, I inherited a number of ASAs from a former engineer and I am trying to understand some of the configs currently on those ASAs. Can someone help translate this Static NAT statement: static (inside, pub_hosts) 10.254.1.200 10.254.1.200 netmask 2...
Here is my asa 5505 configuration and at bottom i am pasting cisco 3760 configuration, I am having trunking problem and seen other people having the same issue but no solution.Problem: when i connect any device on Switch 3760 port 1 which is trunked...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-03-2026 01:04 AM | ||
| 08-02-2026 11:31 PM | ||
| 07-22-2026 05:00 AM | ||
| 07-16-2026 06:39 AM | ||
| 07-15-2026 08:48 AM |
| User | Count |
|---|---|
| 3 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
