Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi AllHoping someone can help me with an issue I am having with zbf on a router config I have just inherited.I have configured it to passthrough GRE but the users still cannot connect outbound to a PPTP server on the internet.I have configured the fo...

When I run a report on the IPS it shows detections on Sunday. I just got several emails this morning Tuesday on those detections. Shouldn't I be getting these notifications when the IPS detects them? I know our email server is working fine or else pe...

                   Hi everyone,I was reading cisco documentationhttp://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080bcad00.shtmlIt says for outbound connection from FWTCP FLAG                            FW FLAGSYN   ---------------...

mahesh18 by Level 7
  • 5516 Views
  • 2 replies
  • 0 Helpful votes

                   Hi Everyone,Need to allow FTP to particular website  in the Internet.ASA has already object group network to allow FTP out towards the Internet sites.So i can simply add the network-object host  200.x.x.x?This i can add to outside ...

mahesh18 by Level 7
  • 2147 Views
  • 5 replies
  • 0 Helpful votes

Hi, I have someone who is worried about denial-of-service attacks. They have 11 vm's that share a connection and want to set it up so that there is a maximum amount of traffic allowed to hit each vm, so if there is a DDoS attack it will only affect t...

Resolved! MGMT vlan

I have 2 L2 switches, one in DMZ and one in LAN. I would like to set a single dedicated vlan for these tqo switches. What is the best option?a) Is it by creating a same vlan on both switches and then connect a cable between DMZ and LAN switch. Config...

avilt by Level 7
  • 984 Views
  • 1 replies
  • 0 Helpful votes

Hello World,I'm receiving an error when trying to access a web server behind from one subinterface to another subinterface on an ASA access the public IP.  I'm getting the following:                               Global       Static NATDeny IP spoof ...

jtadamofod81 by Community Member
  • 2278 Views
  • 3 replies
  • 0 Helpful votes

Hi all,can't connect with SSM through ASDM, only through CLI. If I try , I get the error "Error connecting to sensor.Error loading sensor". I'm totally new on IPS. I appreciate any advice or help.  ThanksASA5520ERA# sh verCisco Adaptive Security Appl...

After upgrading to Java 7.5, I found that ASDM works fine managing the ASA5505 firewall, but trying to access the AIP-SSC5 module is not possible.  I have had to revert back to Java 6 to have full control.Does anyone know how to get Java 7 to work wi...

f2l by Visitor
  • 10285 Views
  • 8 replies
  • 0 Helpful votes

Hello,This may seem like a basic question to th eexperienced engineers but I'm having an issue understanding how it works since I'm not that much knowledgable in this.My question is regarding IP addresseing withint an ASA 5510 configuration.We've bee...

Hello,We have installed 5585-x in active/active mode with trasparent firewall.We have created two virtual sersors for vs1 and vs2 in IPS module and linked with ASA context C1(vs1), C2(vs2) and admin(vs0).As firewall is working in trasparent mode, we ...

Resolved! AnyConnect Mobile

Hi,I just installed an AnyConnect Mobile license on an ASA 5510 but haven't had time to do much else. Does the ASA require any further configuration to support mobile clients, or will the existing AnyConnect setup suffice?Thanks.

lcaruso by Level 10
  • 1475 Views
  • 3 replies
  • 0 Helpful votes
Top Solution Authors
Review Cisco Networking for a $25 gift card