Hi,i want to set high cpu utilization alert that has to recive by mail.means i want to recive these alert on my mail.can i do it using ASDM.Asdm version 6.4firewall 8.2Regards,Prashant
I recently installed an ASA 5505 at a small business, to separate their wired business network from their employee WIFI access. Soon after the firewall installation was complete the office manager had a security camera system installe...
I'm preparing to upgrade our ASAs from 8.2.x to 8.4.x. I know that 8.4 eliminates nat0.What I would like to do is prepare the current configuration to minimize what needs to be changed by the migration script. I've been using nat0 for so long that ...
Hi there.I hope someone can help.I have setup outside management access from specific IP addresses many times in the past with no problem, however I am having trouble with a particular setup in one of our smaller offices.We have an ADSL service termi...
Hello there,Is it possible to configure a branch office ASA5505 to be a ezVPN Client with a tunnel to an ASA5510 and also configure the branch office ASA5505 for a L2L VPN with a different ASA5510?ThxMike
Hello Guys,I am planning to upgrade IDSM-2 software on a 6500 chassis to the latest Software version, but I am confused in one thing if I am connecting my console directly to the Sup engine and log in into the IDSM, which interface can I use to push...
HiI've have an ASA 5505 with a inside network vlan1 (192.168.0.0/24) - i've configured an IPsec VPN profile and a VPN network of 192.168.0.50/24.I can through my VPN tunnel access inside hosts on vlan1 - but not ASDM on the ASA (192.168.0.1). Under m...
I have a Cisco ASA 5540 8.2(1), with permit ip any any rulespacket-tracer input inside tcp 10.56.149.129 871 10.40.170.10 3003showPhase: 1Type: FLOW-LOOKUPSubtype: Result: ALLOWConfig:Additional Information:Found flow with id 1374599592, using existi...
I'm having some trouble with very basic setup, I'm trying to make a very plain and simple network with the ASA 5505, I've strated from scratch over a dozen times triyng to find where I'm going wrong. My main goal is to simply create an IPSec VPN con...
HiI recently reboot my asa 5520, I was trying to remove webvpn listening from my outside nic, even though it wasn't configured !Since then I am getting these messagesJan 21 2013 12:00:59: %ASA-4-402127: CRYPTO: The ASA is skipping the writing of late...
Hi,I have a domain name with a Public IP Addresss XX.XX.XX.59 with this name DOMAIN.COM, My question I have the Static public IP address in my web server can i assing that Static IP address with the domain name associated to the interface 0/0 and th...
Is it possible to perform static Nat's through an internal network?Here's my situation I have a ASA 5510 with a public outside interface (let’s call it 68.68.68.1), and I have an inside private IP address (192.168.1.2/24). The inside IP address leads...
Hello,We are looking at upgrading an aging firewall with a Cisco ASA. I have used the ASA before. We would like to use the ASA in a colocation facility that will have a few site to site vpns. The ASA MUST be able to have redundant interfaces to ou...
I am working on an ASA upgrade and am spinning my wheels. I need to convert a config that was running asa825-k8.bin and is now running asa911-k8.binHere is the config that needs to be converted. Most everything comes over fine I am having issues w...
I am pulling my hair out trying to get this to work! I have other NAT/PAT entries for different IP addresses that work fine (DNS/WEB/SSH) but when I try to visit a website they show the IP of the outside interface, so it doesn't appear to be a static...
