Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi all,According http://www.cisco.com/en/US/docs/security/asa/roadmap/asa_new_features.html, (Table 12     New Features for ASA Version 8.4(1)/ASDM Version 6.4(1))), ASA should be supporting some information about environment via SNMP.There is writte...

Hello Guys,I Have a problem here.We deploy a citrix, and i need set no timeout for especific traffic.So, i create this configuration:show access-list TimeOutCitrixaccess-list TimeOutCitrix; 7 elementsaccess-list TimeOutCitrix line 1 extended permit i...

I have several machines behind this firewall. Each machine has it's own outside static IP and i've setup a NAT for each machine to their outside IP.Everything is working great, EXCEPT, from behind the firewall, I can't browse my own websites that I a...

happyfirst by Community Member
  • 6150 Views
  • 3 replies
  • 0 Helpful votes

I have an ASA with some Anyconnect Premium Peers licenses.  I would like to setup another ASA so that the two ASAs are in Active/Standy mode.  Do I need to purchase Anyconnect licenses for the new ASA?  Do I need to purchase any license to enable the...

Alex Pfeil by Level 10
  • 1116 Views
  • 1 replies
  • 0 Helpful votes

Hi all,I'm configuring a 5505 for a remote office.  Until they are assigned a static ip by the provider I will have to use the providers dhcp address. How do I construct an access list for the outside interface using the external address if I don't k...

jcalero by Community Member
  • 6657 Views
  • 5 replies
  • 0 Helpful votes

Working with an ASA 5520 and I need to set up  SFTP on port 22 how do I configure this within the ASDM 6.2 us OS version 8.2.2.  please help I hae outside and inside ip's just haven't a clue on how to configure it.                  

360degreez by Community Member
  • 1325 Views
  • 1 replies
  • 0 Helpful votes

We have a PIX 501 that is in a remote office and is connected to a PIX 515. The remote office can access all network resources without an issue. The PIX 501 however cannot access the Internet. We used to use a proxy server for Internet access on the ...

ubergeek1 by Level 2
  • 3207 Views
  • 10 replies
  • 0 Helpful votes

Hi all, i want that all my Vlan defined on Switch can access dedicated Management interface of ASA. I can only access only from VLAN 1 and not from other vlans.  (attached is a small scheme)  When try, from any vlans, to ping interface Management of ...

MarcoM by Level 3
  • 5427 Views
  • 9 replies
  • 0 Helpful votes

Ok, so I have an aironet redirecting all traffic to the ASA, the problem is that I can ping websites, however I can not access the web page.When I go through the ASA log here is what I get.3          Sep 10 2012          09:52:58                    1...

jamesdborden by Community Member
  • 2126 Views
  • 5 replies
  • 0 Helpful votes

Before today my concept of priority queuing was that if two packets wanted to go and there was only room for one, the higher priority packet would go and the other would wait.  In other words, if I prioritize VOIP then those packets will travel unint...

I have an ASA running 8.2 what command would I use to achieve the same this is from an ASA running 8.4nat (inside,outside) source static LA_OFFICE_INTERNAL_NET LA_OFFICE_INTERNAL_NET destination static MKTX_INTERNAL_NETWORKS MKTX_INTERNAL_NETWORKS de...

jcalero by Community Member
  • 984 Views
  • 1 replies
  • 0 Helpful votes
Top Solution Authors
Review Cisco Networking for a $25 gift card