Hi, Im student who studying MPF atm, and I just wodnering about the parameters(request args regex, request body length etc..) that http provides, I was looking up and went through some resources and information on cisco website, but it was diffcult t...
Hi all,I got multiple Firewall PIX 515E, and I'm trying to clear all data that's in it. But when I do flashfs I see data in there. pixfirewall#show flashfs flash file system: version:3 magic:0x12345679 file 0: origin: 0 length:2109496 fi...
Hi AllCan you please help me out , how i m getting the logs of below,for which snmp alerts ( snmp polling server 10.21.252.143) are generated from 172.29.131.26where in 172.29.131.26 is the ASA firewall ip& 172.29.131.3 is CIsco Switch ipNov 30 2011 ...
ASA 5520 running 8.2Is it possible to do static (inside,outside) with the outside address being IPv6 and the inside IPv4?If yes, is it possible to do this in parallel with an existing static mapping that goes IPv4 to IPv4?
Hi,I would like to find a way to give access to one website ( let say cisco.com ), give access to whatever website that have the word "test" in the URL and block the access to all the other websites for only one server ( let say the_server ).Here the...
Hello,I wanted to know if there was a way to keep a tunnel active 24/7 on the ASA 5510? My ASA is connecting to PIX 501's, Sonicwall TZ170 and 3com X5(not sure if that matters though)Thanks in advance
Hi,Does anybody know if the NAT changes introduced in 8.3(1) now allow me to pass protocol-41 traffic (ipv6-in-ipv4, ipv6 tunnel) through the ASA to my IPv6 tunnel broker?On the inside of my ASA I have a Cisco 871 configured with a tunnel interface t...
Quick question guys,I am new to CSM. I have worked with Checkpoint Management for some time now and have implemented what they call Management HA. Its the the configuration of a secondary server running the software and configured to be synchronized ...
Hello Friends...I am having issues with PC's in my DMZ to gain access to the internet...I saw a post about a week ago with a simular issue, I added the rule that was recommended... and no change... so..I have a PC with an IP address of 10.1.1.50/24 a...
Hello everyone,I am trying to add some security to my cisco with access lists with no luck. Although i try to follow by example my ACL configuration just blocks all traffik andi cannot find what am i doing wrong. I am not experienced with cisco so i ...
We purchased a bunch of Cisco ASA 5505 for our branch offices. Offices are made up of less than 20 end points. We are using it as a firewall and DHCP server at hte moment but also assumed that it had DNS server capabilities. Basically use it as a SO...
Hello all, I am new to the Firewall world and in doing some troubleshooting, I wanted to see if it was possible on an ASA 5505 to see the details of specific hits on a policyI have an Interface called FrontEnd and I added an any any permit as the la...
I have IPS 4260 has the last IOS version 7.0(5)E4 and when I run diagnostic report I have the following messages 08Aug2011 13:34:15.593 0.000 sensorApp[510] sensorApp/E transmitPacket: Error TX Queue full, no lost buf yet16693 if = 008Aug2011 13:34:...
Hello,I have a little problem with my DCRServer, he's stuck at the " waiting to initialize " status and i can't start him .My configuration is the following : - Windows server 2008 SP1 - 64 Bit ...
Does the ADVANCED SECURITY IOS on an ADVSEC/k( 1841 have theADVANCED IP SERVICES too?Does it ( matter to) have 12.4(20) or (24) T1 (advanced ip image) or similar when doing the CCNA Security/ CCNP Route Labs?********* Its ADVANCED SECURITY but is ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM | ||
| 08-10-2026 08:58 AM | ||
| 08-10-2026 02:48 AM |
| User | Count |
|---|---|
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
