i have an acl which is :access-list local_inside extended permit icmp 192.168.100.0 255.255.255.0 any log alerts interval 4001. if it says only icmp protocol to any, does it cover icmp echo & echo-reply both?2. does interval 400 indicate a period of ...
I am running a PIx with 8.0(4) and ASDM 6.15(51) and cannot bring up ASdM anymore. the firewall is continuing to work just fine, but everytime I attempt to start ASDM it accepts my passwotd, the goes through loading the cached object and then just s...
I have a Public Web Server sitting in my DMZ of my PIX 515E 6.3(5)123. All is currently IPV4. In order for an IPV6 client on the Internet to access my Web Server what will need to be done on the PIX side of things or will I require a new Firewall? Ba...
Hi,On ASA firewall mentioned above I was getting "MSS Exceeded, MSS 1380,data 1381" error whenever data was sent from 10.5.1.36 (Behind HTTP_SERVERS interface) to 10.20.1.36 on interface HTTP_SERVERSFollowing configuration is done n ASA to avoid this...
So currently I have an ASA 5520 in an active/standby configuration and everything is working fine. However I made a fatal mistake of not assigning a standby IP to the inside interface and have no more interfaces available for dedicated management. So...
How can I setup my asa 5510 to allow my users to be able toget to gotomeeting.com
Can anyone explain to me in what exactly the 10host limit of a basic license means? Does the limit apply on the number of hosts allowed to be assigned an internal IP, or is the limit applied on the NAT connections to the outside world?TIA,Erik
Hi - My customer has a pair of ASAs in an active/standby pair.If we ping an address on the standby device from a device on the same subnet, we get a response to the first ping and then the rest time out.I we watch the live event log, we see the four ...
Hi all, I have ASA 5510 that is connected with its inside interface to a database server and the inside hosts. I have a public ip that is natted to the private ip of the server so that the outside users can login onto it. the problem is that the se...
Hi all, i'm going slightly mad trying to sort this.I have a PIX 515 reset to factor default, I'ved assigned an IP in the same subnet as my TFTP server.I believe I need to use the following command to restore the configuration. (Note I have tried it ...
Hi Experts,We have a customer who wants to have static mapping of two public IPs to one internal IP .These public IPs will use the same service i.e httpEg: 83.X.X.1 to 10.10.10.1 83.X.X.20 to 10.10.10.1Please let me know if this is possible on...
Hi Everyone,Ive been having a problem since Ive installed the pix at my office. Our internet is through AT&T Uverse which is VDSL. I read in a few posts that the MTU for DSL connections needs to be set to 1492 as this can cause a problem with the out...
We had to turn off our managment interface on our ASA 5520. Is it possible to save the configs by going out one of the other interfaces? I tried TFTP, FTP and SMB, but always get a "access violation". I created a file on the server, and gave it ch...
I'm currently in the process of migrating from a single PIX515e to 2 x ASA5540s which need to be configured as active/active failover pair. The ASAs will each have a GigE connection to a 6506 switch (Distribution switches) with Sup720 in Native mode...
HiI recently found the beautiful route-inject feature and thought that all my dreams had come true. However it seems that I can only inject routes to one interface, not more, I get the following messageeg:route-inject redistribute static access-list ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM |
| User | Count |
|---|---|
| 6 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
