Network Security

hi experts,i think that the nat-control doesnot effect the static and nat-control is only for the nat commands ? right ? if there is a below scenario will static nat be required or not for the inbound traffic ? asa contains the inspect icmp as well ,...

Hello all,I have one ASA 5520. This ASA and 2 other routers are connected to a switch and they are in same subnet as well.I create 2 default routes in ASA and point to these 2 routers. ( Pls note that both default routes are pointing to same outgoing...

HiJust a question "Can a password recovery possible on Cisco ASA models" condition having physical access to the box. Assuming password recovery is possible then what happens to the configuration on the box after recovery.cheersKeven

I just stood up 2 ASA 5580-40 runnng 8.3(2) code.I configured an active / passive failover configuration with a primary and secondary lan unit.they are directly connected with 10g fiber connections.i downed the primary and the secondary picked up.  H...

Hello all.  ...this is my first post here and I tend to be exceedingly verbose but please go easy on me. Nevertheless, I appreciate ALL feedback whether terse or verbose (…but my little, CCNA-level brain will probably have a better chance at understa...

Hi All,I have upgraded the ios version of my cisco ASA to 8.3(2) recently and since then i am facing the ssh issue.I have the below config for ssh.aaa authentication ssh console LOCALusername engineers password wsOWoGdUuQ.XK65Z encrypted privilege 15...

Evening -Curious if anyone can help with this: When using the NAC agent and a user enters there credentials, then enables the check box 'Remember Me' -  exactly where on a Windows system are teh credentials stored? Are they encrypted in any manner? C...

cisc ips 4240 accessed through ips express version 7.0 3 not able to recieve the real time logs

Okay this is my first try at setting up an ASA-SSM10 module. I have my ASA configured and passing traffic. I started to configure the SSM module. I got into the CLI via the ASA session command. I configured the IP address and can ping it from a PC on...

hi all,i have two isp links one is leased line with static ip and the other one is DSL with dynamic ipmy scanrio is i need to leased line to nat local host to outside to access through web and the DSL i need to use for the local user internet accessi...

How can set the static PAT and global NAT for the same host as the same timeFor example, I would like to PAT host A smtp to host B smtp while NAT host A to host C.static (DMZ,WAN) tcp A smtp B smtp netmask 255.255.255.255static (LAN,WAN) A C netmask ...

I have n ASA 5505 , asa version7.2(4).I change my isp to comcast and the only changes that were made to the configuration was the new external public ip address from the old isp external ip address.My problem is with a inside device static assigned t...