Network Security

What is the recommended mode for 2 cisco switches etherchannel ON or Desirable?

Hello, all! The problem appears when I'm trying to start cisco security agent on RedHat Linux Enterprise ES 4. Installation successfull, but CSA doesn't starts. I'm trying # service ciscosec start Starting ciscosec: [FAILED] and there is ciscosec in ...

Hello, When I transfer the text of my old pix's configuration to a text file, the "isakmp key" doesn't come out, all I see is "*********". I am in the "config t" mode. Can you show me how. I have a full access of my old Pix506e. Thank you. Peter

Hi,Has anyone done routing across contexts in ASA. I have two contexts configured & assigned few vlans to each of them. there is one shared interface between two contexts. routing is configured via the shared interface for inter-vlan communication. b...

Hi. I am a newbie with this card... What IP address goes in the box when you start the wizard? ANOTHER IP different from the mamagement IP OR an IP address of a management workstation?

We have a server which should not listen on port 80 on FWSM. Tried blocking traffic using access-list WEBSERVERS_access_out extended deny tcp host 10.80.201.95 eq www any but didnt work. Need a solution with out using explicit deny statements towards...

I have two nodes connected together via NIC, both which are dual homed to different networks. I would like to add a 506e firewall (dual interface) between them. What configuration approach would I take in doing this? thx

how would be the physical connection for ASA 5540 with failover box. Do I need to save the config inorder to replicate the config with the failover box...I am looking for subinterface- sample ASA config with DMZ scenario..Thanks for help....

I'm working on getting a new license, (never been licensed before), on a IPS module on a 5520. Trying to use the instructions from Cisco, either through the IDM or the CLI, it's not working.Using the IDM, I don't get the option to install the license...

Is there a way to recover the password used during the install for the user idsmdc on CiscoWorks idsmc 2.2?

all internal users use port 8080 to browse the web...existing ISA sever translates 8080 to 80.....I'm replacing ISA with ASA 5510.....how is this translation done in an ASAI the static translation for single host but cant see how to do it for all int...

I've been using CisoWorks VMS (PIX MC) to handle all my PIX devices.After I modify a certain device and attempt to generate config it now gives:Fatal Error: std Exception(class Cdi::InvalidIdException)Other devices are o.k. - I cannot realisticaly de...

Hi, Actually I have configured a pix515E with Remote Vpn with xauth means authentication using ACS server.When I connect it through VPN Client software ,it only ask for username and password, but i want that it also show or ask for a domain name. Plz...

I have PIX 515E with 2 interface, inside, outside, I have PAT from inside - outside and NAT from outside to inside.I have installed CISCO ASDM, when I am monitoring the status syslog and droped packet rates I found that, ACL drop packet rate is very ...