Hi, we purchased NGFW 3K series with FTD and now want to reimage it with ASA.Does it violate the warranty of device?
Forum Posts
Hi Team , weird question I have standard configuration aaa authetication login default group KKK localaaa authetication login console group KKK local when use ssh , I am fine to use tacacas username/password to get in ,, no issue at all but when I us...
Deploying Cisco Secure Access across our business (using the web proxy option only for now)PC fleet - Using the Cisco Secure Access Client - Works greatAVD (virtual Desktop environment) - Using Proxy Pac - Works greatServers - IPSEC - Works ok (toss ...
I am in the process of migrating 3 ASAs into 1 FTD. I have created separate VRs for the routing and they will all use one ACP. When migrating the NAT rules is the preferred process to use one NAT policy for the FTD which will be used within each VR? ...
Hi all, I have a client PC which occasionally needs to upload large amount of data to a server at another company who we have an IPSEC VPN tunnel with. I have attached a rough drawing of this setup. We recently upgraded from an ASA to Cisco FTD ap...
Resolved! FMC Reset Hit count
Hi, Im trying to find a way to reset the Hit counts on my access control policies. Is this feature available or am i missing something. Everytime i click refresh, the counter changes, but never resets. Any advices?TIA, Shabeeb
Hi All,I'm currently deploying an FMC 4700 appliance which I would like to connect to the network using one of the additional 10/25G SFP+ interfaces (Eth2 or Eth3) and not the default copper RJ45 interface (Eth0).I found the following document that d...
Resolved! How to factory reset FMC 2500
We need to perform a factory reset on our FMC 2500 that's running 7.0.4. I've been through the CLI and did a lengthy Google search, but I'm not been able to find anything that works. Can someone provide some direction? Thank you.
Resolved! FMC/FTD Policy Migration
HiIs it possible to migrate FTD policy from an FMC both running version 7.0.x.x to a new FMC running version 7.0.x.x then upgrade the FMC to version 7.4 and assign the policies to new FTD running version 7.4 ???? Thanks
Resolved! Question on FTD Mgmt & Diag Interfaces
I'm currently following the guide listed down below in order to deploy some FTDs in Azure which I've been able to (still in early stages). However, looking at the guide and referencing other materials online, I always see the Diagnostic0/0 interface ...
Hello Cisco Community,I am a senior networking student currently planning my graduation project. I’m looking for a unique and innovative idea that combines networking, security, and, if possible, some programming aspects.If anyone has idea suggestion...
Problem Details: Configured 2 Destination NAT as per below nat (Inside,Outside) source static 10.8.55.229 199.19.3.64 unidirectionalnat (Inside,Outside) source static 10.8.55.229 199.19.5.67 unidirectional Following plan below configured above 2 line...
Resolved! Firepower syslog retention period
If anyone knows about the syslog retention period on the Firepower itself, could you let me know?I am using the Firepower 3100 series. The Firepower is acting as an ASA on the appliance. I use OS 9.20 (3).Syslog information is basically set to be tra...
i try https://firepower_mgmt_ip ,and get service unavailable.how to disable https for firepower?
Hi Cisco Community, I have a Cisco FMC and two Cisco Firepower devices. I would like to back up all system configurations on the FMC, including objects, NAT rules, ACP rules, and all other settings except for license and smart license information. I ...
