We would like to run an ASA on Hyper-V using asav9-18-4-57. On the Cisco we page, we only see below .vhdx available: https://software.cisco.com/download/home/286119613/type/280775065/release/9.18.4 There is no mention of .57 as in 9.18.4.x - what is ...
Forum Posts
"I've configured syslog forwarding on my Cisco ASA to send logs to Secure Network Analytics, and the ASA's logging configuration is complete. However, I've noticed that the UDP TX counter for this destination is consistently at 3, which suggests logs...
Good day I have a problem with deployment it's not possible because Deployment is failing due to the policy changes report request in progress
Resolved! EIGRP authentication FlexConfig FDM
Hi, I am trying to set up EIGRP authentication on a port-channel interface on a Firepower 2100 via FDM directly (I don’t have FMC). I have configured a template with a key-chain and also associated this with the name of the interface, it seems to tak...
Hi to all,i decided to upgrade our FMC from 7.6 to 7.7But when i try to do certain tasks it hangs there, for example when creating a nef flexconfig object it just hangs there or when i try to companre two different NAP policies it hangs there ...This...
HiSo I am planning on exporting the policies of several FTDs managed by the same FMC running 7.0 I will then be importing the policies to a new FMC which is running the same version 7.0 this FMC will then be upgraded to 7.4 and a My questions are1....
I currently have 2 sites, and each site has (2) FTDs in active/passive failover. When looking at the Platform Settings, they both share a single policy. I need to add another policy for each pair to change their syslog server settings to go to differ...
I want to migrate ASA 5515 to FTD2120, and I downloaded the Migration tools from Cisco version 7.7, but I have an issue as shown in the image below, after signing in using CCO, I tried with different computer same issue
Hello,I have set up a FTD managed by cdFMC for remote access VPN. For authentication I use SAML with Azure AD as an IdP. The authentication itself is working fine, but the user identity of the session viewed in FMC has "Discovered Identities" as it's...
Hello Experts I have a customer that has a Firepower Deployment and we have integrated into ISE using PXGrid. We have also created an AD Realm and integrated this via LDAP. VPN authentication is making use of a Certificate and when a user logs on or ...
Hello Community, I'm a little bit out of my depth here in trying to troubleshoot a few issues around my configuration and wondering if anyone has some insight into this for me. I'm currently trying to set up remote access for vpn, I would like to uti...
Dear Comunnity: I have the following question can i copy a back up from an FTD administrated via FMC to an Stand Alone FTD managed just with FDR, i cant find any oficial information about this topic, please i need your help
Dear Community, We recently purchased an FPR-1150 with a CDO license, expecting 90-day log retention within CDO itself. However, the partner did not provide the SEC-LOG-CL part code. We opened a TAC case, and they informed us that an additional licen...
Trying to get a port forward setup for a server behind the firewall and having an issue getting it to work. The traffic appears to be dropping after touching the outside interface, even though an outside ACL is created for this traffic. Here are the ...
I have setup up a number of FTDS that are managed by FMC in CML labs. I have setup the in-built desktop in CML that is hanging off a FTD. I am able to get the internet via FTD-->Router (NAT)-->External Connector and I am able to get internet access f...
