Question about FAB-3 of Nexus 7710

[Peyman Zadmehr]

Hi 

I am searching about different I/O Modules of Nexus 7710. 

There are three M3 Modules for this model:

1- N77-M312CQ-26L

2- N77-M348XP-23L

3 - N77-M324FQ-25L

I want to ask are these modules supported on "N77-C7710-FAB3" and "N77-SUP3E"

Some documents only mention to SUP2E and FAB2 and this confuses me...

Thank you for your help and support....

[Sergiu.Daniluk · Accepted solution]

Hi  

The M3 modules are supported together with SUP3E and FAB3.

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/hw/nexus7000/installation/guide/b_n7710_hardware_install_guide/b_n7710_hardware_install_guide_chapter_01.html?bookSearch=true#concept_1F2B0FD787C94811AEE6C7A8D4307B94 

Supervisor modules (one or two) (N77-SUP2E and N77-SUP3E) in Slots 5,6

I/O modules (1–8) in Slots 1-4, 7-10

• 48-port 1/10-Gigabit Ethernet I/O module (N77-F248XP-23E)

• 12-port 100-Gigabit Ethernet I/O module (N77-F312CK-26)

• 24-port 40-Gigabit Ethernet I/O module (N77-F324FQ-25)

• 48-port 1- and 10-Gigabit Ethernet I/O module (N77-F348XP-23)

• 30-port 100-Gigabit Ethernet I/O module (N77-F430CQ-36)

• 12-port 100-Gigabit Ethernet I/O module (N77-M312CQ-26L)

• 24-port 40-Gigabit Ethernet I/O module (N77-M324FQ-25L)

• 48-port 1- and 10-Gigabit Ethernet I/O module (N77-M348XP-23L)

Fabric modules (up to six with two behind each fan tray) (N77-C7710-FAB-2 and N77-C7710-FAB-3)

There is this also this compatibility matrix: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/nexus7000/sw/matrix/technical/reference/Module_Comparison_Matrix.pdf 

However this is not updated with SUP3 and FAB3, but I send an email to Cisco Documentation team to update the matrix.

Stay safe,

Sergiu

[Peyman Zadmehr]

Hi

Thank you for the answer. yes I refrenced that Matrix so I got confused.

Thank you for the help.

Peyman