03-21-2005 08:08 AM - last edited on 03-25-2019 06:46 PM by ciscomoderator
Hi,
I got a new Call Manager (3.3.5) for tests.
But when I try to connect to this one, a error message "Unable to connect to server" appear, does anyone know this problem ?
Please help me...
03-21-2005 06:35 PM
"I got a new Call Manager (3.3.5) for tests." Did you reinstall the AC client or are you using the one from the "old" server??? I assume you can Ping the server & have configured the AC properly?
Mike
04-08-2005 02:27 AM
I have the exact same problem in call manager 4.0. I followed the checklist in the help guide when I configured the console. So I'm not sure what's going on. If anyone has had this happen before and you got it resolved, please let me know.
Step 1
Add attendant console users in Cisco CallManager Administration.
Step 2
Set up pilot points and hunt groups in Cisco CallManager Administration.
Step 3
Create the ac user and associate all pilot point devices with the user.
Step 4
Verify that the Cisco Telephony Call Dispatcher (TCD) service activates and runs on all servers that are running the Cisco CallManager service.
Verify that the CTIManager service runs on one server in the cluster.
Step 5
Make sure that each attendant Cisco IP Phone is set up correctly for use with the attendant console.
Step 6
Make sure that the attendant console PC is set up correctly for use with the attendant console.
Step 7
Make sure to create the appropriate dial rules and directory lookup rules in the DialRules.xml file and copy the file to each Cisco CallManager server in the cluster.
Step 8
Install and configure the attendant console on each attendant console user PC.
07-28-2006 07:42 AM
Do you can resolve this problem? because I had the same problem now. I'm using CM 3.3(3) and no changes are made.
Any suggestion?
07-28-2006 12:06 PM
What is the name of the server? if it has unsupported characters like the underscore (_) then it could cause the problem and you should use the ip address in all the configurations in CCMAdmin.
Have you tried restarting the TCD and the CTI service? If not, do it in all the cluster.
01-08-2011 11:54 AM
I have a same problem I use call manager 6.1 and I can ping call manager,
How can solve this issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide