06-03-2005 07:54 AM - edited 03-13-2019 09:20 AM
i'm trying to update the line label and display with the following soap message :
<axl:updatePhone xmlns:axl="http://www.cisco.com/AXL/1.0" xsi:schemaLocation="http://www.cisco.com/AXL/1.0 http://gkar.cisco.com/schema/axlsoap.xsd" sequence="1234">
<name>"SEPababababab"</name>
<lines>
<line index="1">
<label/>3000
<display/>MyDisplay
<dirn uuid="{my uuid}"></dirn>
<ringSetting>Use System Default</ringSetting>
</line>
</lines>
</axl:updatePhone>
Is the request correct?
Is the "dirn uuid" the pkid from the NumPlan Table of CCM database???
Many thanxs.
JB
06-03-2005 08:55 AM
One suggestion is that instead of doing something like this:
An element like
Here's an example that should work:
The above example assumes the line is in the default partition, since none is specified.
06-06-2005 12:01 AM
It's been a while for me but if I recall correctly, you can get the pkid from the browser while navigating the CCM Admin pages. Perhaps you've noticed that pkids are appended to urls. So in your case, when you are configuring a line in the admin pages, you should see the appropriate pkid in the address field.
06-14-2005 04:08 AM
Hi,
Using your code it gives me the following error:
[Item not valid: Directory Number XXXX not found.]
Thnxs
06-14-2005 04:44 AM
The line you specify has to already exist. I am guessing that you are indicating a line that doesn't exist yet.
If you want to add a line, check out the addLine request. Once you have added the line, you can assign it to a device...
06-14-2005 05:17 AM
The line exists in the provided device. The error doesn't make any sense.
thnxs
JB
06-14-2005 06:02 AM
Does it exist in a different partition? Did you specify the correct partition?
Just a thought!
06-14-2005 07:25 AM
You really know what you are saying.....
As you told me to use
Thanxs a LOT.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide