Catalyst 4000 & dial peers

[i.sampson]

I am having trouble with Analogue to Primary rate calls on the same Catalyst

Calls cannot go to the dial peers for the PRI, which do work with callManager.

Does anyone have any examples.

My config is

dial-peer voice 8 pots

destination-pattern 8

progress_ind progress enable 8

direct-inward-dial

port 1/0:15

!

dial-peer voice 77602 pots

destination-pattern 77602

[mimckee]

This link should help you out with your config.

http://www.cisco.com/warp/customer/788/AVVID/config_h323_ccm.html

Thank you,

-Mckee