CCM 3.3.4 - anyone try yet?

[pbrown]

Has anyone upgraded to CCM 3.3.4 yet? I'm thinking about it to get EM on the 7912 and 7970 phones. It's only been out a few weeks.

--Patrick

[mtashiro]

I have it running on a lab box and one customer. It has been fine so far. No issues at all.

[mwiper]

I have upgraded our lab from 3.3.3sr4a to 3.3.4 with no real problems, although did have to re-install MLA.

Publisher took a little over 2 hours, each subscriber was about 1.5 hours.

[pbrown]

Thanks Guys, I will be doing this upgrade soon.

--Patrick

[christoph.dittenberger]

I did the upgrade on one of our clusters two weeks ago.

So far no main problems.

Minor flaws I had were:

1) My MLA-database replication was broken. I had to reestablish it. I'm not sure if this problem is related to the upgrade or if if it was there before the upgrade.

2) The upgrade replaces the latest phone images with older ones. Especially if you use 7970 phones I recommend to install the latest phone images again. (The old image had several bugs.)

I tried EM with the 7970 and the Communicator and it's working. I did not try it with 7912 but it should work because there is an entry for 7912 (and 7905) in the Callmanager GUI.

[jpinkus]

In regards to MLA, CallManager version 3.3(4) requires MLA version 1.2(3). This version of MLA was posted to CCO a couple of days after the CCO release of 3.3(4).

[gshonting]

I instaalled 3.3.4 in a production network, its working great. EM does work on 7912.

[r-reed]

I had an issue with MWI with non-Unity VM system. The VM ports now use CSS vs a list of partions. The upgrade makes a CSS using the partions but could not apply it. TAC has a workaround now but beware if using non-Unity VMs.