Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having trouble with DLs after moving Unity 4.2.1 to new hardware and upgrading from W2K to 2003.I cannot manage the DLs from SA. When I click on Members, all of the options are grayed out.I've also noticed that the names of the DLs have strange n...
We are running CM 4.1.3 in a network with 12 sites ad about 600 phones. We are also a large user of 911 services. There were over 30 911 calls last week.Anyway, we've created our own 911 monitoring and alerting system that works great. It ties in MSS...
I'm trying to get ip-phone-bypass to work. I have an ASA-5510 server and the client is a 871W. The server is configured for NEM and the client is using http xauth and manual connect. I can authenticate and bring up the tunnel with the web intercept a...
I have a T1 circuit that is generating Line Code Violations and Path Code Violations errors. I did an extended ping loopback test to test the router and demarc extention. That tested fine. I called the phone company (Qwest) and they said the line is ...
I want to upgrade my Unity server from W2K to Windows Server 2003. I'm running Unity UM 4.2.1 with an Exchange 2003 partner server. I think the procedure will be as follows:Backup using Disaster Recovery BackupCopy backup file offlineUninstall UnityR...
Thanks for the reply but that wasn't what I was asking. I already have my E911 solution in place and working well. What I need is a method of alerting certain users when 911 is dialed. This is keeping me from upgrading past 4.x. What is the 5.x and 6...
FIXED!Qwest called and told me that the NUI was mis-provisioned. The line code was set to AMI. I don't know how it changed. The circuit has been running fine for three years. Oh well.. at least it's working now.--Patrick
I changed the VWIC but can't move the router to the NIU location. Cisco gave me a procedure to test the cable with a hard loopback plug which showed my cablr to be good. I'll just keep calling Qwest until they get around to fixing it. This circuit ha...
That is the correct next hop. There is a static route that routes traffic to that subnet to the inside interface of the firewall. The firewall is a Watchguard (yuk) and is a NAT boundary between the two BGP routers. There is a static NAT entry allowi...
