08-03-2004 02:39 AM - edited 03-13-2019 05:52 AM
Hi,
We are installing a CCME (1760-V with a VIC-2BRI-NT/TE). We are hitting the issues, that when we make calls from mobile phones,we can see the DID extension and the call is routed,but when we make calls from some ISDN or analog numbers, DID is not working.
Our config:
interface BRI0/0
description PSTN (1)
no ip address
isdn switch-type basic-net3
isdn overlap-receiving T302 5000
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
interface BRI0/1
description PSTN (2)
no ip address
isdn switch-type basic-net3
isdn overlap-receiving T302 5000
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
!
voice-port 0/0
translate calling 4
translate called 10
echo-cancel coverage 32
compand-type a-law
cptone AT
timeouts interdigit 5
timeouts wait-release infinity
description PSTN (1)
!
voice-port 0/1
translate calling 4
translate called 10
echo-cancel coverage 32
compand-type a-law
cptone AT
timeouts interdigit 5
timeouts wait-release infinity
description PSTN (2)
!
dial-peer voice 100 pots
destination-pattern 0T
direct-inward-dial
port 0/0
forward-digits all
!
dial-peer voice 101 pots
destination-pattern 0T
direct-inward-dial
port 0/1
forward-digits all
!
Any best practice configs.
many thanks in advance
August
08-04-2004 08:52 AM
August,
Please post your translations and CME configuration as well so we can reference that to help you out. Your dial-peer and BRI configuration looks OK.
Pat
08-04-2004 12:31 PM
Hi thanks for your reply:
we found out in several debugs that our translation rule overrules the overlap receiving:
We have two config examples to this, but both have to be inserted on the voice-port
voice translation-rule 1
rule 1 /^0.*/ /10/
rule 2 /^$/ /10/
!
!
voice translation-profile incoming
translate called 1
!
!
translation-rule 10
Rule 1 null 10
Rule 2 ^0.% 10
How could we achieve that if somebody is dialing no extension or 0 that the call is routed to the attendant place (extension 10)
This won´t work without translation rule.
Any other suggestions to do this?
Many thanks
August
08-09-2004 11:33 PM
example with 251 for the city 13373 PSTN extension 20-29
call 0 for getting to PSTN
voice translation-rule 1
rule 1 /^\(.*\)/ /0\1/ type subscriber unknown plan any unknown
rule 2 /^\(.*\)/ /00\1/ type national unknown plan any unknown
rule 3 /^\(.*\)/ /000\1/ type international unknown plan any unknown
!
!
voice translation-rule 2
rule 1 /^13373\(.*\)/ /\1/
!
!
voice translation-rule 3
rule 1 /^000\(.*\)/ /00\1/
rule 2 /^00\(.*\)/ /0\1/
rule 3 /^0\(.*\)/ /\1/
!
!
voice translation-rule 4
rule 1 /^2\(.*\)/ /251133732\1/ type unknown national plan unknown isdn
rule 2 /^00\(.*\)/ /\1/ type unknown national plan unknown isdn
!
!
voice translation-profile incoming_pots
translate calling 1
translate called 2
!
voice translation-profile outgoing_pots
translate calling 4
translate called 3
!
!
dial-peer voice 1 pots
translation-profile outgoing outgoing_pots
destination-pattern 0T
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
forward-digits all
port 1/0/0
!
!
dial-peer voice 2 pots
translation-profile incoming incoming_pots
incoming called-number 13373
direct-inward-dial
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide