Configurin 827-4V with ATA 186

[josegre]

Hi, i want knows how configure an ATA 186 with 827-4V with statics ip.

Thanks a lot.

[Hin Lee · Accepted solution]

Unfortunately your question is very generic. I don't know what you want to do since Cisco 827-4V is a ADSL router.

If you need to config static entries into the ata186, please see this page

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800c3a50.shtml#task1

If you wish to configure a static IP address on your ATA, then you must disable DHCP through the IVR system. You must then configure the IP address, subnet mask, and default gateway also through the IVR.

H. M.