12-05-2007 04:47 AM - edited 03-13-2019 04:46 PM
How I can change the Cisco logo, in the call manager express 4.2?
Solved! Go to Solution.
12-05-2007 10:22 AM
Hi Ricardo,
Sorry about that :) Maybe this will be more helpful.
CallManager Express: Create a Customized Background Image for the 7970 IP Phone
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_tech_note09186a008062495a.shtml
Hope this helps!
Rob
12-05-2007 06:00 AM
Hi Ricardo,
Have you looked into using this CME Feature?
System Message Display
The System Message Display feature allows you to specify a custom text or display message to appear in the lower part of the display window on display-capable IP phones. If you do not set a custom text or display message, the default message "Cisco Unified CME" is displayed.
When you specify a text message, the number of characters that can be displayed is not fixed because IP phones typically use a proportional (as opposed to fixed-width) font. There is room for approximately 30 alphanumeric characters.
The display message is refreshed with a new message after one of the following events occurs:
Busy phone goes back on-hook.
Idle phone receives a keepalive message.
Phone is restarted.
The file-display feature allows you to specify a file to display on display-capable IP phones when they are not in use. You can use this feature to provide the phone display with a system message that is refreshed at configurable intervals, similar to the way that the text message feature provides a message.
The difference between the two is that the system text message feature displays a single line of text at the bottom of the phone display, whereas the ***system display message feature can use the entire display area and contain graphic images.
SCCP: Modifying System Message Display
To modify the system message display on phone screen, perform the following steps.
SUMMARY STEPS
1. enable
2. configure terminal
3. telephony-service
4. system message text-message
5. url idle url idle-timeout seconds
6. end
System File Display: Example
The following example specifies that a file called logo.htm should be displayed on IP phones when they are not in use:
telephony-service
url idle http://www.abcwrecking.com/public/logo.htm idle-timeout 35
From this good CME doc;
Hope this helps!
Rob
12-05-2007 07:34 AM
Rob, I need add a picture in the Background Images, from the User Preference/Cack ground Images menu.
12-05-2007 10:22 AM
Hi Ricardo,
Sorry about that :) Maybe this will be more helpful.
CallManager Express: Create a Customized Background Image for the 7970 IP Phone
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_tech_note09186a008062495a.shtml
Hope this helps!
Rob
12-05-2007 10:53 AM
;) Thank !!!!!
I will configure
08-18-2013 06:39 AM
How do you do this for Call Manager 8.6.1?
Sent from Cisco Technical Support iPad App
08-18-2013 09:03 AM
omgjames1 wrote:
How do you do this for Call Manager 8.6.1?
Sent from Cisco Technical Support iPad App
You are responding to a 6 years old thread. Please search the forum and documentation before asking.
08-19-2013 05:46 AM
James,
Just download the List.xml file via the CLI and make the changes as you need.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide