mgcp with subrate PRI

[rjain]

can you configure cisco call manager to work with subrate pri using MGCP. Customer got the PRI using 4 channels. Calls will not go through if you don't configure the call manager for all 24 channels.

[Brandon Buffin]

Callmanager does not support fractional PRI with MGCP. Please see the following link for confirmation.

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801ad22f.shtml

Hope this helps. If so, please rate the post.

Brandon

[anup.anand]

Fractional PRI is not officially supported by Cisco, but you can do this. Check these previous posts

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddae3a5

Regards,

Anup