11-06-2005 07:47 PM - edited 03-13-2019 11:07 AM
Hi All,
I am looking for a sample configuration of a router used in a VoIP network showing in particular QoS settings for G.711 traffic. None of the dial plan or route pattern, etc.. information is necessary, just the QoS configuration would be greatly appreciated.
The WAN is simply ethernet handover, so no frame relay config etc.. is required.
I am still going through the Cisco website but thought someone might be able to point me in the right direction.
Thanks.
11-07-2005 05:53 AM
Your best option is to use the AutoQoS feature described in the link below. It automatically configures QoS for you based on your configuration/bandwidth. There is also a link below describing some QoS mechanisms for voice. You can ignore the Frame Relay related config.
AutoQoS Q&A
http://www.cisco.com/en/US/tech/tk543/tk759/tk879/technologies_q_and_a_item0900aecd8020a589.shtml
VoIP over Frame Relay with QoS
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_configuration_example09186a0080094af9.shtml
Hope this helps.
Brandon
11-10-2005 02:46 PM
Thankyou for your response to my questions. In relation to AutoQoS, it seems to be a part of Ciscoworks, since I cant find any information about what the actual commands are to use this facility.
The second link is more helpful, but I am wondering if anyone has an actual sample configuration where QoS and VoIP have been deployed on a WAN that uses ethernet handover (eg, no ISDN or Frame Relay related items).
Thank you once again for taking the time to respond to my question.
11-10-2005 07:08 PM
AutoQoS is built in to IOS. It is not part of CiscoWorks. Please see the links below for a detailed explanation of AutoQoS as well as configuration examples.
AutoQoS for VoIP
http://www.cisco.com/en/US/tech/tk543/tk759/tk879/technologies_white_paper0900aecd800a8561.shtml
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.4
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455a3d.html
Hope this helps. If so, please rate the post.
Thanks,
Brandon
11-11-2005 02:54 AM
Best place for examples and best practices is www.cisco.com/go/srnd. The QoS SRND has everything you want.
http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide