07-29-2003 10:15 AM - edited 03-13-2019 12:57 AM
I have upgraded my 7940 phones to P00305000101 and now the MWI lamp does not light when a message is received. The envelope flashes and the message appears at the bottom of the display ("you have new voice mail") but the red light does not turn on. I can call the MWI extension and turn on and off the flashing envelope and clearing vmails also turns off the envelope. Is this a new setting that needs to be re-enabled? Is there a bug that I can not find?
07-29-2003 10:19 AM
What version of CM are you running?
07-29-2003 10:21 AM
I am running Call Manager Version 3.1
07-29-2003 11:42 AM
Have you tried doing a global reset of the MWI in Unity?
07-30-2003 05:05 AM
Yes, No Change. It appears to be a setting in the phone itself. The phone is getting the MWI indicator and turning on the flashing envelope just not the red light. And this all happened after I upgraded the firmware. Is the flashing envelope not associated to the MWI like I think it is? Maybe I am just way off...
08-11-2003 05:19 AM
Has anyone else loaded the new firmware yet? Did you get the same problem?
08-11-2003 05:38 AM
I have been running P00305000101 for 2 weeks on 4 7940s, 1 7960 and 1 7960 with a 7914 side car.
No problems. Message Lights work OK.
Planning to upgrade the other 300+ phones in a week or so.
Running CCM3.3(2) SP B
John
08-11-2003 07:01 AM
You might try down loading the P00305000101 software onto CCM. The reason I'm suggesting this is I had a problem with the 7912 not registering with CCM. I downloaded the latest firmware for the 7912 and then had a listing for the 7912 in the Device Defaults page but the Phone Template field was blank. Result was the 7912 still would not register. I down loaded the firmware a second time and everything started working fine. Just a suggestion.
Larry
08-11-2003 08:23 AM
Was the MWI definately working prior to upgrading the firmware. The reason why I ask is that I came across a similar problem which was only affecting specific IP Phones.
The problem in this instance was related to the user's specific message handling rules within Outlook. The rule moved a VM-message from the inbox to another folder, consequently the MWI was set to off, and hence the MWI would never come on.
Just a possibility, check the users message handling rules ???
08-16-2003 08:48 AM
We have identified a bug in the new phone loads: CSCec04257. The problem is that the way MWI messages are sent to the phone changed with 3.2. The new (5.0) phone loads work with 3.2 and 3.3, but not with 3.1.
10-01-2003 12:41 PM
We are having the same issue running 3.1 and the new loads, interestingly enough part of CCM 3.1 Dev Pack 11.
Will Cisco ever come out with a fix for those of us who are not planning on upgrading to 3.3 anytime soon?
Thanks,
Tony.
10-01-2003 12:47 PM
The problem was fixed in load P00305000104, so P00305000200 (on cco) should have it as well.
10-02-2003 05:30 AM
I downloaded and installed the latest phone firmware and this fixed the problem. P003-5-0-2
10-06-2003 06:12 AM
Hi:
I did upgraded to firmware P00305000300 or P00405000300 but the 7914 didnt load where can i found the newest version for 7914?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide