2940 and IOS upgrade

[aalejo]

During 2940 IOS upgrade the Switch shows the message and stop upgrading:

Image info:

Version Suffix: i6q4l2-121-22.EA1

Image Name: c2940-i6q4l2-mz.121-22.EA1.bin

Version Directory: c2940-i6q4l2-mz.121-22.EA1

Ios Image Size: 3123712

Total Image Size: 6574592

Image Feature: LAYER_2|MIN_DRAM_MEG=32

Image Family: C2940

ERROR: Image requires 0x02000000 bytes of DRAM;

only 0x01000000 bytes are present

Is any 2940 version with 32MB RAM?

Alex

[richgodfrey]

Did you erase the original image file first. If you didn't, this will be why it is not letting you copy the image across, there probably isn't enough space for both the old and the new. Search Cisco.com for the upgrade instructions for this switch before you attempt this.

Hope this helps.

[aalejo]

After erase flash the same thing happends.

[spremkumar]

hi

chek this link which gives the archieves of ios which u can choose based on ur own requirements.

http://cisco.com/cgi-bin/tablebuild.pl/cat2940-archives

Note:u will be prompted for CCO login to access this page..

regds

prem

[b.eman]

I am having the same problem as mentioned above. I deleted the old bin and html files but still received the same error. I am tiring to upgrade to 12.1-22.EA1. from 12.1-13.AY. For the main reason of PVST+.

Alex did you figure out how to do it?

[milan.kulik]

No, this is an IOS bug CSCec11178.

See my workaround on http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.eea3eb6/3#selected_message

Regards,

Milan

[b.eman]

Got it thanks!