Other Network Architecture Subjects

Does anyone know how I can restrict a user account having multiple dial-in connections active at once?

Please any one show me how can I load IOS image on the router 2500 through xmodem ?I tried the command "xmodem" or "copy xmodem" on rom monitor, but cannot. The commands in rommon of 2500 different to commands in rommon of 2600, 3600.By the way, plea...

Hey Folks,Please, Please helpI am told to do FMECA for a network but I dont know what that is and what that for. Could anyone advise me how FMECA document format looks like or send an example worksheet of FMECA for a network. I will appreciate it.Reg...

A single 6509 core switch with redundant SupII engines (slot-1 & 2) each with MSFC2 cards installed. The SupII engines are both running CatOS 7.3(1).I am looking at configuring the switch for HA, where the SupII engines will need to be set for system...

Anyone knows what does this msg bring about? %SYS-4-P2_WARN: 1/Invalid traffic from multicast source address 03:03:03:03:03:03 on port 1/2I noticed that the distribution switches receiving this warning msg has their cpu driven up to 75% utilization.

I am facing problem on my callback feature on a 2651 router. Originally it was working fine with an old IOS 12.1 but after upgrading it to 12.3(8)T, it stops working.What I found out on the line 33 40 configuration, the flowcontrol and stopbits line ...

Hi all,do anyone know difference between "old" chassies WS-C6509 an the Enhanced version WS-C6509-E?It's already in price list. The price is same as the old. Thanks, Jiri

%SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x8030D0E8, alignment 0

Can someone advise me whether as said in the title possible or not?Thanks in advance.Regards,Ron

Hi all,I had a problem between communication between vlans. I had vlan 100 and vlan 200. Here are the details:vlan 100--------name: vlan 100ip add: 172.16.100.254/24vlan 200--------name: vlan 200ip add: 172.16.200.254/24IP routing is enable.From host...

When I use cisco's Dynamic Configuration Tool<http://www.cisco.com/appcontent/apollo/configureHomeGuest.html>£¬I meet three questions,I want to know if you can help me£º the first question£ºWhy I can't add the 1-port and 2-port 10 Gigabit Ethernet...

When using RME 3.4 importing devices will change from pending to managed, but also go to the "not responding" state. When I show the details of the reason for it not responding it states that they are not responding because "could not commit groups...

Configured my 4000 for a second vlan. Fa 5/18 is in vlan 2. Would like a managment workstation and server to be available in both vlan 1 and vlan 2. How can this be done?